Magnet Motor flywheel/generator1
Uploader Comments (mcorrade)
All Comments (51)
-
the power in mine land is suck 4 ours peer day so if i did this will give enough power like 220v 5A ????????????
-
so are you getting more power from the large cross spinning than you use to fire the bedini coil, and thus have free energy???
-
The plans for free energy magnetic generators
can be found by simply doing the following:
go to Google - search for: "Top magnet generator review"
and click the first one (not the advertisement)
-
so, ideally, the small X magnet bars spin and thus turn the larger X, which then creates a voltage that some of which is diverted to power the small X, leaving some left over? yes or no?
-
Há um erro crasso neste projeto, assim como os outros.
Um motor "perpétuo" não pode dar partida com auxilio de empuxo ou mesmo ser parado com as mãos e permanecer parado...
Você deve buscar o "loop" que faz com que o ciclo seja contínuo. Este é o grande problema dos motores ditos "perpétuos"
-
use larger magnets
-
Id think the best way would be to mount the bike generator directly above the flywheel, as was sugessted to you...this would eliminate having to add parts and you could move on to completing the circut..
-
@mcorrade Of course, you`re using a Bedini Coil. It all makes sense to me now. Thanks.
You appear to be impressing yourself with the motions of these machines rather than analysing what is actually happening between the components. Casual observers are not impressed until you can explain step by step, in slow motion, what is actually happening.
AClarke2007 1 year ago
@AClarke2007 go bother someone else with your self absorbed BS. If you listened, instead of waiting to comment, you would have heard the explanation.
mcorrade 1 year ago 7
you kinda sound like johny knoxville
nathan82206 2 years ago 3
ok so is that good or bad??????
mcorrade 2 years ago
Attach a heavy flywheel disk to the bike-dynamo so that it has great mass and innertia(momentum). Being a heavy disk, it will start to spin hard but will need only a little push to sustain the movement. Get this heavy dynamo disk receive its movement through a small belt attached to your white wheel (dig a small canal on the periphery of the white wheel to keep the belt into place). An increaced effort for some reason never decreases the amperage- the contrarry.has to do with this radient energy
8RR8R8 2 years ago
I had the very same thought an even though I've abandon this design I'm work on a couple of other designs with that very idea in mind. However I found something much better than the bike dynamo. I got my hands on a large printer stepper motor and I can generate 12V just by spinning it with my hand and there's nearly no drag.
I have a much bigger and more promising setup comming but it will take many hours to complete. I will take a vid of the progress so far sat
mcorrade 2 years ago