After Oven Fix Tips Part 1
Uploader Comments (xCustomFlipx)
All Comments (16)
-
where is part 2 exactly ?
-
I don't know that it is cheap solder as much as it is lead free which doesn't stand up to heat well.
-
how long did this fix last???
-
@untouchable759 the washers on top are keeping the heat sink from contacting one or both the processors. Try a thinner washer.
-
your right the x-clamps let the board flex IF YOU DON'T SCREW THEM BACK DOWN there are eight count them eight small t8 torx head screws that hold down the area with the x-clamps as long as you dont lose them the x-claps work i work on and build computers and i can tell you that the force the x-clamps make on the board is equal if not less than that of a cpu heatsink on a desktop. the x-clamp fix is a bandaid fix its not a permanant fix i have had to reapply x-clamps to several x-boxes i fixed
-
@untouchable759 Its The paste u add it to the chips never use cheap paste i will let ur fan go crazy use good thermal
-
Do you still get the rrod or two red lights? Or do the lights go green?
-
@VincentFunk hey i fixed mine like that but wen i turn it on the fan is really loud then gets louder than shuts off wt do i do??
Where did you buy that bulk thing of washers
denverbronco27 11 months ago
@denverbronco27
I got them from ebay. Literally type in xbox fix and you will find them.
xCustomFlipx 11 months ago