power steering fix

replacing the lower seal on the power steering gear box and both drag links
Donate: http://bit.ly/cEVT4E
Twitter: http://www.twitter.com/hanz5599

Category:

Howto & Style

Tags:

• power
• steering
• pitman
• arm
• gear
• box
• drag
• link
• ball
• joint

[Shyhighable]

HEY NEED HELP NOW!! How do you get the Seal out i got the lock ring out but

it's like a metal like washer? or metal seal? anyway how do you get it out i tried filling

half full and turned wheels nothing happen.

[hanz5599]

@Shyhighable keep in mind you need to have the engine running, the front wheel need to be off the ground and you need to turn the wheel quickly.

[hanz5599]

@Shyhighable if that doesnt work then you can try a magnet or drill it and use a small piese of wire to work it out

[SouthernHoneyChild23]

how did you get the pittman arm back on? with a hammer

[hanz5599]

@SouthernHoneyChild23 It has a bit of a taper so it should slid on easily untill the last 1/4 to 1/2 an inch. tap it with a happer if needed but dont hit it to hard. if it sticks use a piece of pipe or a socket that fits over the shaft. once its on far enough just use the nut to pull it on the rest of the way.

[SouthernHoneyChild23]

What was the seal Called Pit arm seal? Power Steering Seal? thanks

[hanz5599]

@SouthernHoneyChild23 Ask for a "Pitman arm seal kit". I would also suggest getting a repair manual so you can show they guy behind the counter what you're looking for, just in case.

[Shyhighable]

I uploaded a video on my Channel if you would watch and tell me what to do i

can't get that washer out of the bottom it looks to big to come out the bottom

[SouthernHoneyChild23]

Right on It came off nice and smooth,

[SouthernHoneyChild23]

ya Going to replace seal thanks.