22R Turbo EFI idling
Uploader Comments (bugturbo67)
Top Comments
-
if its not knocking or ticking you have a problem.
-
If you read the sidebar, it says he replaced the carb with the EFI unit and the turbo.
All Comments (36)
-
@erndaugg I'm going to go out on a limb and say SteedSpeed? I think they are the only makers currently of top mount turbo manifolds.
-
22-R = 22-Rocksolid!
-
C = California emissions compliant for that vintage
-
awesome motor,my 22r just had new valves and recon head,its a 1990 and it floged a new hilux lol
-
No, you are quite wrong, 22R = Carb, 22RE = EFI (hence the 'E'), then there is the rather rare 22RET (turbo).
-
its actuley a 22RET. r is carb, re is EFI, ret is turbo. iv herd of a 22RETC but not sure what it is. a 22ret is a 22re but with low comp rings and a turbo. a 22re is a 22r block with efi straped in their.
-
pretty sure that it can be eather way 22r (efi) or 22re(efi)
i want to do the same thing but just wondering wat exhuast manifold u where useing
erndaugg 1 year ago
@erndaugg, I built the manifold as described in the sdsefi website, I can't post up the link, but is in their tech page called "Fabricating a turbo header".
bugturbo67 5 months ago
Im doing the same setup on my stock 22re. how many pounds of boost are you running and are you running any performance injectors or any fuel management
MasterYota4Runner 3 years ago
I'm running 11 PSI now, and the injectors are from a Supra (440cc). Engine management is Megasquirt ,V2.2 board, flashed with MegasquirtnSpark-extra firmware, and add-on flyback board for the low impedance injectors, and another add-on PWM board for driving a 3-wire Bosch IACV. The V3.0 board already has these add-ons on the mainboard.
bugturbo67 3 years ago
how many horses?
mfuji0001 3 years ago
I dont know.. no dyno here.
bugturbo67 3 years ago