16F84A strange problem
Loading...
142
views
Loading...
Uploader Comments (guysoft42)
see all
All Comments (4)
-
@k323r any INPUT should be grounded - if you have noisy power, ground via 100 Ohm resistor. Don't ground unused outputs or you'll fry your PIC! :)
-
any pin not used should be at 0v wired to ground.
-
Hello, i had your problem in a similar proyect, but it wont work, the problem is the power supply, is a common universal regulator, IM WRONG?
connect a condenser in the positive and negative wires and GOOD LUCK
-
I had a similar problem and it turned out I hadn't grounded something.
Once I found it and ground it correctly everything ran fine.
Your body is acting like a ground when you get into close proximity of the chip.
Loading...
Problem was there was no MCLR pin. I know it seems like a grounding problem, but it apparently was not!
guysoft42 2 years ago