Skyfun@1300 Watts
Loading...
4,129
Loading...
Uploader Comments (sureggem1)
see all
All Comments (14)
-
if i doppler your video the average speed is arround 195 Km/h very nice
wel done
i ordered a skyfun too cant wait to fly this bird
-
hi there! nice plane, building the same plane with the same setup, a few q:s, do you use expo on the elevators, if so, how much? Im using a dx6i. when you say "put a washer under the rear of the motor" where did you put it? at the top mounting hole or the bottom mounting hole ? thanks in advance=)
-
i put this motor with 4.7x4.7 with 4s 1800mah and esc 70amp hk and speed was about 250km/h but after two flight about 3min each flight the motor got warm and i bursted... may this set up is only for cold wheather not for greece... so i'm gone pyt 2350 kv...
-
@kstmark non problem with 4,5 x 4,5 prop.
Loading...
@sureggem1
Did the motor fit onto the stock mount or did you modify it??? I see you have written "motor mount 2° up" and have check hobby king for that part and could not find anything. Can you please explain how you mounted the motor.
Thanks,
blaken88 1 year ago
@blaken88 motor fits into the stock mount, just have to remove a little metal ( 2 millimeters max ) on the longest part to allow the motor to have a little space. Just put a washer under the the rear of the motor mount before you screw it securely to give a little up thrust.
sureggem1 1 year ago
Awesome vid, im currently building a foam board F117 and have this motor, can you advise me on what prop size and ESC amapge to use? Many thanks.
MarneusAugustaCalgar 1 year ago
@MarneusAugustaCalgar Motor can turn a 4,5 x 4,5 prop (or 4,75 x 4,25) and 4 cells (2650 Mah). No bigger prop or will destroy the motor.
Turnigy 80 A ESC with built-in ubec is great.
Good flights !
sureggem1 1 year ago
@sureggem1 Thanks for the info :) However i will be running the same motor but a 3s 2.2 lipo and the same prop size as you so do you think a 40 amp esc would be ok? Thanks.
MarneusAugustaCalgar 1 year ago
@MarneusAugustaCalgar You should test it with wattmeter ! I've never tried it on 3 s.
sureggem1 1 year ago