I/O Stringer w/Frit 2of3
Loading...
Loading...
7,736
Uploaded by RKGlass on Apr 9, 2007
This is a pipe with stringers and frit. It has a bend to the neck and feet to hold it steady. Real simple pipe.
Link to this comment:
Share to:
Uploader Comments (RKGlass)
see all
All Comments (14)
-
@Burritoast You're gay.
-
Really helpful vid, nice work
-
dude this is sick
-
more gay music
-
dude how long will it take for me to learn how to do this iv wanted to for so long and how much is the stuff you need
-
A bushier flame Less oxy is hotter
than excess oxy
-
damn, what kind of work do you do with the redmax? I got the biggest oxy tank airgas had and now I dont have any oxy problems, they fill it for 20$ and it last for like a week... I am probably not cranking my oxy enough.
-
how long does your oxy tank last?
Loading...
100 videos
YouTube Mix for George Clinton- 10:01Blue Tubing Enclamo Pipe 3of4by RKGlass8,133 views
- 6:55Honeycomb with Air Bubbles Pendant4of4by RKGlass4,844 views
- 7:10I/O Stringer w/Frit 3of3by RKGlass5,682 views
- 3:46Glass Flameworking: How to Make Lampworked Glas...by DelphiGlass27,429 views
- 9:48Devardi Pure Silver Foil: Stringers, Wrapping, ...by mailbuggy4,411 views
- 8:18HOW TO TWIST CANE AND PULL STRINGERSby beadmanglass9,406 views
- 6:50DJ Mittens, strictlly Sherloc Homes and Kittensby albjohnnyson59,447 views
- 6:42glass blowing the orbby crookedgrindstorm8,500 views
- 5:48Glassblowing Demonstration - Phat Glass Designsby PhatGlassDesigns12,314 views
- 5:00Seattle Pipe 7of7by RKGlass4,721 views
- 3:09How to make glass fritby stainedglassbob3,515 views
- 8:00My first pipe for youtube (Part 1)by spanoTSi12,359 views
- 9:51Glass blowing Mushroom pendant/ marble make a ...by liqidearth101,920 views
- 5:43one dropby crookedgrindstorm446 views
- 10:01Blue Tubing Enclamo Pipe 1of4by RKGlass29,072 views
- 4:50Glass blowing video by Bonginby BonginTv144,568 views
- 6:00Glass Blowing make a glass tobacco pipe (part ...by liqidearth155,134 views
- 0:26Lino Tagliapietra: v10by blurdoogie4,326 views
- 9:49Making glass jewelryby Othit61,959 views
- 7:11I/O Stringer w/Frit 1of3by RKGlass13,155 views
well kinda depends on a few things. I use K tanks. On a midrange...2-3 days of lots of work. On my redmax though I can easliy burn through a tank in a 1-1.5 days.
RKGlass 4 years ago
I'm a pathetic newbie. When your fully melting glass, how do you prevent it from falling down? And how do you prevent the rods from popping or flying? When I start heating rods, sometimes it pops, and breaks off. What am I doing wrong? sorry, I'm a real newbie.
vvn33 4 years ago
well...its all about gravity and balance, in my opinion at least. It just takes a while to figure out when the glass is gonna move and use gravity to balance it. Practice. My rods rarely pop or break off because I dont put them in the flame right off the bat. I may get them close to the flame and it may look like its in the flame but I actually heat it up just outside the flame for a few seconds first.
RKGlass 4 years ago
Are you from portland maine? or is it oregon???
fullcollapse0155 4 years ago
Portland oregon, the capital of Microbrews. Portland oregon as in where Northstar and Glass Alchemy and Bullseye and Uroboros is located.
RKGlass 4 years ago
its a midrange by nortel...its a stepdown from a redmax or major and a stepup from a minor.
RKGlass 4 years ago