"Antigravity" Method 14 of 15 Sonic Ultrasonic Acoustic Group V

"Antigravity" Method 14 of 15 Sonic -Ultrasonic Acoustic Group V
Filmed 1991-1996, 14 of 15 methods of levitating an object known to the author John Iwaszko, edited from the video Antigravity the reality made in 1996. The "antigravity" method shown in this edit, was introduced and was referred to as Levitation on sound which has now been reclassified by the author as, Sonic Ultrasonic Acoustic (Method 14)
As with all systems there are many technical ways to achieve levitation of the various methods I have classified it is beyond the scope of this presentation to show all of them. Method 14 Acoustic levitation will show a small variety of methods for suspending matter in a medium by using acoustic radiation pressure from sound and ultrasonic sound waves.
The first and the simplest method I discovered in 1991 involved sound waves to generate a vortex of air from the output of an 100W piezo electric horn tweeter (driven with a 100W amplifier and oscillator) where the aperture of the output cone was reduced to a small hole of approximately 1 mm in diameter centred within a sealed cap over the horn.
The maximum air disturbance is at the peak fundamental frequency of the tweeter employed as this generates the greatest amount of air and acoustic pressure waves. The little foam ball oscillates and gyrates wildly at the peak frequency. Based on the size and geometry of the object, with careful frequency and waveform adjustment a relatively stable levitation can be achieved, therefore levitation height, rotation and oscillation can also be controlled by the frequency, waveform as well as volume, this allows a very simple manipulation of solids and liquids or even separation without any physical contact, as the materials selected via simple control will levitate in the air. This type of Aerodynamic levitation can also used in combination with acoustic control where it is used to concentrate a flow of gas or air along an axis upwardly against the object to provide a force to lift, the majority weight of the object, and acoustic levitation means which I will describe next for exerting an acoustic positioning force on an object to restrain movement away from the axis and to hold the levitated object in a selected position. This form of levitation is a hybrid and another example of combining two classified methods, to describe it more accurately is method 14 sonic ultrasonic, acoustic group V and method 16 group VII Aerodynamic levitation which will be described.
WARNING:- Some of these experiments operate directly from 240VAC mains supply or far higher voltages at high currents are potentially lethal. Do not build unless you know exactly what you are doing. Do not touch any part of the equipment while it is plugged into a mains outlet. And remember that the methods described do not conform to any electrical safety standard and many of the experiments performed are downright dangerous.
Powerful magnets such as neodymium magnets or powerful magnetic fields generated by coils can be dangerous and not to be played with. Powerful magnets or magnetic fields can crush fingers. The power of magnetism can also cause chunks of metal to take flight and cause injury to body parts and or blindness.
Rotating machinery can pose a danger from rotating or reciprocating parts. Particularly when machine parts move toward each other, or one part moves past another, which can crush limbs.
Extremely intense sounds can burst ear drums or can be physically painful to human ears. High-intensity ultrasound waves are extremely dangerous to experiment with as they can heat human eyes or other tissue by absorbing ultrasound energy which becomes heat by vibration and corresponding energy loss.
Exposure to radio frequency energy or ionizing radiation that can be generated by coils can not only burn as they get hot but also cause radiation burns, damage to the skin or other biological tissue.
Direct skin contact with liquid nitrogen will cause severe frostbite (cryogenic or cold burns). This may happen almost instantly on contact, there is always a potential hazard when handling liquid nitrogen.
Be careful! Use good solid judgement in your work, and think ahead. I John Iwaszko do not endorse the experiments shown, and am merely passing on information, I have learnt through experiment. Safety is your responsibility!

Category:

Science & Technology

Tags:

• High Frequency Sound
• Ultrasonic
• Sonic Levitation
• Sound Levitation
• Electrogravitics
• Acoustic
• Acoustic levitators
• Aerodynamic levitation
• Aero-Acoustic levitation
• Antigravity
• levitation
• floating sphere
• levitation sound waves
• water levitation
• ufo
• U.F.O
• flying saucer
• sound producing sources
• loud speakers
• piezoelectric
• St Clair
• Helmholtz
• single axis levitator
• resonant
• High Frequency
• ultrasonics
• defying gravity
• alien
• John Iwaszko
• non linear
• nasa
• nirvana
• ovni
• opera

[LANN98]

where do you find such beautiful music?

do you know how sound is like heat?

is this mainstream science?

[JOHNROMANIWASZKO]

@LANN98 @ LANN98The music is by Robert Rich from the album called Numena, and is scientifically based on the whole numbered ratios between frequencies, inspired by the mathematical relationships between the notes. Sound and heats mode of transmission is similar as both are considered to be waves. Sound is a sequence of waves of pressure that propagates through compressible media such as solids, air and water.

[JOHNROMANIWASZKO]

@LANN98 Heat on the other hand flows spontaneously only from systems of higher temperature to systems of lower temperature. Thermal radiation is the emission of electromagnetic waves and represents a conversion of thermal energy into electromagnetic energy, their oscillations result in the electrodynamic generation of coupled electric and magnetic fields, resulting in the emission of photons, radiating energy and carrying entropy away from the body through its surface boundary.

[JOHNROMANIWASZKO]

@LANN98 Unlike sound electromagnetic radiation, or light, does not require the presence of matter to propagate and travels in the vacuum of space infinitely far if unobstructed. And yes I consider what I have presented to be within the corridor of mainstream science, beyond which opens to new horizons.

Cheers JRI

[TySpoonz]

EVEN A FISH!?

Very cool stuff, thank you.

[JOHNROMANIWASZKO]

Hi TySpoonz , I'm glad you enjoyed this episode, the "fish" comment follows on from "Antigravity" Method 8 of 15, Dia-magnetic pyrolytic graphite, bismuth etc, where I state "Or even a living frog!", interestingly NASA in 2009 Levitated a mouse. Thanks for watching.

Cheers JRI

[BoltOfThundor]

You sir, get a jar of cookies, who ever made this video is super, your making YouTube a better site. ^_^"

[roonyroo1]

Easily one of the best series on youtube.

Wheres part 15?

[aNickzz]

Yea but the fish would get one hell of a headache

[ShafaeyIqbal]

again i see the ball as earth lol

[abusiveben]

quarks...took me 5 months.i mapped their acoustic waveform(pure chaos 'yes" but are easily manipulated through thought form(its the most efficient energy form,universal energy is the fabric that weaves together space and time itself. transcendental??????????? need help with coming back from the realm of chaos.my mind got hurt recently..we are the same BEN

[manoftnuva]

Is it less required energy to lift up 1 gram of the weight by this sound technology, then if it was required for a small crane, based on electric engine?

[coldarc]

@JOHNROMANIWASZKO remember when your playing with sound do not allow the energy of the sound to behave like a transfer of energy from one place to another. when you send a sound pulse into the target mass the mass will create a tranverse wave (implosion within itself) you have to match the frequency of the transverse wave with the outwave so that the energy you feed into it become added to the energy it have already received so the energy become contained within the mass itself.

[NitroMaximus]

acoustic force fields would be awsome. :)