RC ADVENTURES - XTM SUPER CRAWLER - BUILD VIDEO 3 - Soldering Techniques and ESC Setup
Loading...
Uploaded by djmedic2008 on Jul 3, 2009
http://www.RCSPARKS.com - ALL NEW WEBSITE!! CHECK IT OUT! - February 2011
RATE / COMMENT/ SUBSCRIBE!
The third in the XTM SUPER CRAWLER Build Series
Thanks to the sponsors, EASTRIDGE HOBBIES and AIRTRONICS
- 26 likes, 2 dislikes
-
Link to this comment:
Uploader Comments (djmedic2008)
Top Comments
-
tip on soldering, dip the bare wire ends in flux, then melt solder on iron tip, then put iron tip on wires, no extra solder needed. Solder from iron will wick into wires coated in flux. Ive been soldering that way for years and have never did it your way, plus it frees up a hand. Your technique is more like the way plumbers do it.
Video Responses
All Comments (27)
-
ok i think im going to upgrade tomarrow. do i need a new controller for the esc
-
the tamia plug is for the batterie?
-
Heyy mate thanks for the hints and tips. Would it be possible to run 3 motors off 1 esc?
-
where exactly did you buy the esc rooster, novak 55 motors and the reciever that you use in the next video?
-
@djmedic2008 thanks cause i was thinking that i could burn my esc and buy a new one
-
medic where can i get just those tires ?
5 videos
RC ADVENTURES - XTM SUPER X-CRAWLER - Video Build Series- 5:49RC ADVENTURES - EFLiTE BLADE MQX BNF Quad-Copte...by djmedic20083,812 views
- 11:25RC ADVENTURES - LEARNING TO DRIFT - Part 5 - St...by djmedic20084,534 views
- 12:56RC ADVENTURES - Learning To DRIFT - PART 4 - TE...by djmedic200823,005 views
- 10:53RC ADVENTURES - OVERKiLL PLOWS IN HEAVY SNOW - ...by djmedic200829,534 views
- 3:13Traxxas Blast + Mamba Maxby microraver38,169 views
- 3:45rc jeep rubicon crawler setupby Morbidao16,006 views
- 0:23RC 2.2 Scaler, Project: "Power Wagon".by justinart249,278 views
- 3:20Professional SMT Soldering: Hand Soldering Te...by jkgamm041167,286 views
- 0:55ESC 60A on board BEC connectionby MrArrow196110,727 views
- 9:46RC ADVENTURES - PROJECT OVERKiLL - DUALLY - Epi...by djmedic200830,781 views
- 9:01RC ADVENTURES - 2.2 TAMIYA HIGH LIFT 4X4 CUSTOM...by djmedic200861,502 views
- 4:34RC ADVENTURES - XTM SUPER CRAWLER - BUILD VIDE...by djmedic200836,884 views
- 5:31RC ADVENTURES - PT1 - AXIAL SCX10 HONCHO SCALE ...by djmedic200856,508 views
- 6:23How to break in a brushed RC car motor.by Leprechaun7989,974 views
- 4:45RC ADVENTURES - Water "Break-In" Brushed RC Ele...by djmedic200896,323 views
- 2:17Early Bronco Rock Crawler, Crawls VAN, ectoffro...by jminnoch316,079 views
- 2:12RC Suburban Build-upby underseaflight47,043 views
- 7:41How to make a RC winch for a home made 1/8 scal...by jncaillet99,068 views
- 7:07XTM X CRAWLERby txokrider15,469 views
I believe you mentioned a BEC installation and I do not see it, is it needed with those high current servos? Also, where the hell do I get this kit? I have looked for it on the web and nobody has it on sale. Can you help me find one? Do you have a video on how to install a BEC on dual ESC's
Achisachis73 8 months ago
@Achisachis73 bro, this video is 2 years old.. and they stopped making this product
djmedic2008 8 months ago
what could happen if i plug in the crawler rooster esc to a tamiya 540-J motor?
the 540-J motor in think is for an sport car.
rabfs 11 months ago
@rabfs nothing out of the ordinary man. it should power it. Im not 100% sure though because I havent done it before.
djmedic2008 11 months ago
you should touch the iron :D
sp3nc37 1 year ago
@sp3nc37 why would you even say such a stupid thing? Oh I know.. your an idiot.
djmedic2008 1 year ago 6