Overunity??

http://Gigagauss.com Video number3 on the steorn toy thingy, now i have 30 grams on one side and 60 on the other. Dropping the 30 gram wieght raises the 60 gram wieght. Is this the steorn effect? Or is it mechanical advantage? Or is it just the power of magnets....I don't have a clue, so will have to go to maths to find out what is happening here..It is worrying in a way, i think it is just magetic repulsion that is pushing the wieght up, but if you were not an honest person you might be able to con someone into thinking its overunity. I just don't know..Craigy

Category:

Howto & Style

Tags:

• Steorn
• Motor
• Magnets
• toy
• overunity
• imanes

[Eltimple]

And they say magnets cannot do work....LOL

[theoneagain]

none of your experiments everwork good try though wait until you see my fuelless heater i ve built defenitly overunity 300watt electric motor for 1500 watss heating soon on youtube not quite finished yet

[Eltimple]

Edison was once asked how he felt about about failing 1000 times before inventing the light bulb. His reply was that he did not fail a thousand times, but that there were 1000 steps to the answer..

[linoatwork]

cont... if you take away the magnet you won't get the same effect as long as the height to which the larger weight is raised is not ("approximately" due to the ratio of masses used being approx.1/2)inferior to half the height by which you raise the smaller weight.!

[Eltimple]

No it won't work at all without the magnets LOL. Its easier to imagine this as a seesaw, 30 grams one side 60 grams the other, since 30 grams is twice as far away from the fulcrum , the moments are the same. The magnet in the middle makes it a bit more interesting

[Eltimple]

Using Pe=MGH it appears that this is very nearly 100% efficient. dropping the wieght inputs.06 joules and energy required to raise wieght is .06 joules. The wieght dropped has now been adjusted so that there is no overshoot. So now the standard magnet can be removed, and various other combinations , or arrays of magnets could be used to investigate the steorn effect

[MYLOW121363]

you need to figure out how to over come the flux gate at the point of the magnetic field weight and counter ballance whont work i have all ready tryed for 20 years and belive me its hard its all int he flux gate

[yojimbo1981]

The question seems to me "Is there magnetic resistance when you raise the 30 gram weight"? If there is then resetting the machine will take as much force as it took to raise the 60 gram weight, it might be 100% mechanically efficient, but friction would eventually stop it even then. If you get no resistance when raising the 30g weight other than the weight... In short figure away to measure the necessary force to raise the 30g weight, it might not be what you think.

[DikkeZwaarte]

maybe attach the weight on the axis like a flyweel?

[refdachef]

the lever arm linkage set is only your control. you can further enhance it to get more shudder(bounce/swing whatever) IN the rotating crank. this what you want. stuff the shudder in the arm. to form a loop you want the longer shudder in the crank going thru a one way gear system which will trigger your control arm and thus a loop.

[siroca]

Would mind elaborating? Do you mean that the speed of the flywheel magnets field entering the field of the stators field determines the force of the reaction with the stators field? Or do you mean something else?

[somelse]

Could it be that you use to large wieghts in combination with to small magnets. Because the weight is dropping so fast that the stator can't even react that fast.

[siroca]

Magnetic fields are parabolic and flexible, so as the flywheel magnet's field enters the field of the stator magnet field they dent slightly being two like fields. Since both magnets are trying to re-exert the natural shape of their fields and are both pushing in the same direction do you get a magnetic bounce effect (?) which drives the stator along the linear bearing with equal or more force?