MX-5 Miata Timing Belt 1 of 2 at Mike's Place
Uploader Comments (MikesPlaceBiz)
All Comments (17)
-
what happen if i put it in tdc 4? because i have replace the timing belt and valves of a 1992 miata i have a good compression and the the car dont start
-
@MikesPlaceBiz Hi Mike
İ found that article too and followed everything. I even took the EGR valve, located at the end of intake and clean it up. I think I just need to clean up the code form computer and see what would happened. Thanks for your help.
-
EVEN THE KINGS POINTER STICK IS MIATA.
-
Hi Mike, I have a late 91 Miata,(big nose) and ordered parts from you last week(for the Loctite 660 cure). I didn't know you had these vids until after I ordered from miatamecca on eBay.. After I got the parts(4 days ago) I found this vid, and I understood most of your advice, put it together, and it started right up. Great help! It started on about 3 turns of the crank. Thanks again, 176K on the clock, engine runs great now. You are my source for parts & tips.
-
Mike,
My 1993 Miata never had starting problems until today. When I turn the ignition, there's nothing. The battery checked out fine,
What else could it be?
-
very interesting, thank you
-
Great video King. Thank you
-
You sir, are a gentleman. Thank you SO much for posting these films up. Very, very helpful.
Hi Mike, I have 2000 Miata with check engine light due to EGR valve. I was trying to find a video that show how to take it out, clean it, and put it back. Is that a good idea to clean it? how? OR it is better to replace it? The valve is expensive and I am student. Please help me up! Thanks.
tabrizlioglan 5 months ago
@tabrizlioglan
Hello,
Is your code for excessive EGR flow? If so the upper intake manifold will need to be removed and the EGR passage port behind the throttle body cleaned. Search Miata.net for more info.
Mike, The King of Miata's
MikesPlaceBiz 4 months ago