Bounty Hunter Energy Projects A 3 part series Part 3
Uploader Comments (Elcanom)
All Comments (14)
-
hey can you try to get a loop going like feeding the power it makes back into the drive batt aloung with the chargeing batt if you can do that the drive will never die and you will be able to charge the dead batts
-
call it as you like, but this is free energy
-
ANY charging method CAN create heat. The reason yours doesn't is because the charge current is very low. Break out those amp meters!! You can tell absolutely NOTHING bassed on a voltage reading alone.
-
You did a nice professional wiring job on your transistor bank. I am curious about the main spindle with one firing and four energy pick-up coils. Why four pick-up coils when most people use a single coil? You are not really getting any more energy with one coil vs. four coils. On the second spindle, do you get much energy out? I assume they also go through the switching transistors. Do they run off of the same timing circuit from the first spindle?
-
Please hurry the diagram video to market! I am mostly done making a scaled down unit but I cannot tell completely how to make the circuit you show on the right side. Also when you do release next one can you tell us what the output amps and volts are? I know it is charging the 96v battery (grouping) but what is the true voltage output and with that amp capabilites?
Thanks in advance!
Coog
-
I am going to be on pins and needles awaiting that video. In fact I was about to email and ask for the diagram in a picture or something. If I could be a nagging wife or something like that I would hound you till you put that video up!!! I will offer to host any jpeg images of the circuits etc if you would like VERY high speed web connection on my server.
Thanks in advace!
Coog
-
Is there a place where we can download the circuit diagram.
Thanks
-
The word is Zero Point Energy....
I am going to make another video showing the circuit diagram and the step by steps on how to build it. Also I am going to show step by steps on winding the coils. Sorry It's been a while, but we've been incredibly busy and have made quite a bit of progress too. Thanks!!!
Elcanom 3 years ago
Thank you very much for the comments. Please help by taking a second to rate the video also :) I will do more step by step and post by this weekend. Thanks again!
Elcanom 3 years ago