Mosin Nagant in .450 Marlin
Loading...
Uploaded by zebdeming on May 30, 2009
Me shooting a rebarreled M44 Russian in .450 marlin. Did all the work myself, cut shank, and threads, cut the chamber, and made alot of the tooling myself. Thanks to the guys at homegunsmith.com for all they're support
- 1 likes, 0 dislikes
-
Uploader Comments (zebdeming)
All Comments (6)
-
@zebdeming Wow! This is pretty sweet. I guess there is an advantage of having the rim on the 7.62x54R! Kinda cool that the bolt works for the .450 Marlin as well (who woulda thought right?). What pressure does the 7.62x54R operate at?
-
I can see where the .450 Marlin would be a good conversion for the Mosin Nagant. It would also be good for the Siamese Mauser too. Navy arms used to make those in .45-70. Another good candidate for conversion would be the Steyr M95 straight-pull bolt-gun.
-
very nice, how did you modify the extractor so that it would eject that cartridge???
- 0:45
My son underestimates the 444 Marlin.by sierrareloader32,985 views
- 0:27
Homebuilt Bolt action First Shotby zebdeming33,522 views
- 2:16
Bolt action 450 Marlin built from scratch.by FLBAN1,610 views
- 0:49
My wife shooting a .450 Marlinby Toyuzu22,037 views
- 0:25
Home built 450 Marlin, part 2by exabitster1,641 views
- 0:49
450 Marlin 1895mr LEVERevolution 325 Grain Flex Tipby bdean954,841 views
- 0:22
Shooting the RND edge 338 lapua semi autoby jimmym40a219,260 views
- 2:24
Foundry for the Home gunsmithby 8MADJACK181,037 views
- 5:45
450 Marlin vs Solid Granite Stone.movby MrJumBow2,191 views
- 1:47
Measure the torque needed to unscrew a 91/30 barrel after 73 yearsby tnekkc5,607 views
- 4:24
Mosin Nagant Bolt Polishingby MarshalZhukov19,979 views
- 0:12
Marlin 450 target practiceby mjr16880111,043 views
- 2:17
Gunblast.com - Marlin 1895 SBL .45-70 Lever Action Rifleby Gunblastdotcom240,030 views
- 1:19
Mosin Nagant Round won't chamberby davidschild071,482 views
- 9:36
Bolt Disassembly and Cleaning for Sticky Bolt Part 2by MarshalZhukov6,143 views
- 1:02
My Mosin Nagant 91/30by FRecon3333,876 views
- 0:10
Small girl big gunby Collinmcd87326,952 views
- 1:03
close ups of my homemade air riflesby vilimaaman110,697 views
- 0:11
308 Turk mauser First shotby zebdeming738 views
why didn't you hold the gun up in front of the camera long enough to show the action and barrel so those of us with an interest could see and appreciate your work?
8thinpigs 2 years ago
Never really thought of it. Next time I get it out I'll see what I can do
zebdeming 2 years ago
how in the hell did u get a mosin nagant to shoot .450 marlin
StAgMaStA1 2 years ago
really wasn't hard, it's a single shot right now as I haven't modified the magazine. The boltface isn't modified in any way, just unthread the barrel (it's on REAL tight) turn down the shank and set it's length, cut the threads, and chamber, just simple rebarreling, no different than a mauser or rem 700. I settled on 450 marlin because of it's lower pressure than other belted mags and the head dia would work with the bolt, the barrel shank is small so high pressure should be avoided
zebdeming 2 years ago
The extractor isn't modified at all. It's a single shot only right now, but I'm planing on trying to rework the mag to feed the 450 marlin. The rim dia of 7.62x54 is bigger than the .532 of the rim of the 450 and other belted rounds, but I wouldn't use Magnum belted rounds, as they are higher pressure and the barrel shank dia of .972 IMHO isn't up to the higher pressures that they operate at, the 450 marlin is about 43000 psi and the mags are around 61000 psi IIRC
zebdeming 2 years ago