Heli-Max Issues

Heli-Max's Axe cx is fun to fly once you get it set up right. The E-Flight Blade mcx is better is some ways.

Category:

Science & Technology

Tags:

• heli
• max
• axe
• cx
• flight
• blade
• mcx
• micro
• rc

[rkw6086]

Thanks for the video. I was told this was a great first time helicopter, but I had the issue most are having, uncontrollable spinning.

I adjusted the L/R screw (turned it just about a quarter of an inch) and it stopped my spinning problem almost entirely. What it does now is controllable and makes it easier to fly. I even moved the push rods out, and lo and behold, made the thing respond better to my commands to slide left and right. Again, thanks for the awesome video!

[SuperChargedRC]

Thank You...

Glad it helped you out.

Happy Flying

:-)

[2689corvette]

Hi, i have a axe cx and when im trying to hover the heli just spins slowly right ward which of the two screws do i have to adjust to fix that, thanks

[SuperChargedRC]

Hello 2689corvette,

If you go to 0:28 in the video the back one (closest to the motors) marked L/R in the video. Turn it a little at a time counter clockwise. It will never really be perfect but it will help you get close to perfect..

Hope this helped.

[rickgarcia6]

nice vid by the way, just had a question oin the axe cx.

Im new to helis and had a question on my cx if imove the cyclic control to the left it moves slowly foward, it also tends to mave AFT with no cyclic input any help will be appreciated

Thanks!

[SuperChargedRC]

Just adjust the trims on your controler. Trim it in the direction it needs to go to stay in a hover..

Hope this helps you.

Thanks for watching. :)

[tilligetbig]

@byron3579 hey I just purchased a Axe cx micro and have read some negative things about them can u help me out with the removal of the right side tail stabilizer deal. I think I understand it but not 100 % on it, also I'm thinking of changing the skids

[ssonic116]

The Mcx it way smoother than the heli max.

[byron3579]

I have one of these and its been completely uncontrollable because of the same problem. All I did was remove the horizontal stabilizer off the right side of the tail and add 2 pieces of silicone fuel line tubing to the skids to protect them and now it flies perfectly straight, takes off straight up(used to fly backwards about 3 ft on takeoff) and hovers hands free for 10-15 seconds easy. Go figure.

[bamaboy0020]

mr proto cx crashed today the fly rod went missing so imed screwed until sunday

[conor447]

this blows i just broke my axe rc cuz it wouldnt stop spinning im so pissed that i found this vid >:(

[24FRETSHARKFIN]

great video. would u know how i could adjust my blade cx2 coaxel so it hovers clean and doesn;t yaw right or left by it self. thank u.

[RiceRacerH8R]

Your video helped me with my CX Micro, thanks!

[standhd]

I like that song....were can I get it?

Great vid BTW!