PVC CLOUDBUSTER

Based on the Lakhovsky coil, I built this unit made of PVC, a steel exhaust pipe and a cone HHG. The difference between this unit and every other device I made is the pipe isn't directly connected to the orgonite. There is a 2" gap between the top of the HHG and the bottom of the steel pipe and this gap, according to Lakhovsky, will increase the effectiveness of the orgonite and should ramp up the cloudbusting potential. More power in a smaller package.

I chose PVC because it's cheap, easy to work with, and I can adapt it to different uses by simply swapping parts.

This is only the first phase in this experiment. More to follow.

Category:

Science & Technology

Tags:

• orgone
• orgonite
• Wilhelm Reich
• cloudbuster
• Lakhovsky
• spare parts

[kuloliku]

Hi Tom, can i also use a quartz crystal in the orgone field generator?

[lofas23]

@kuloliku Sure. I'll add some chips and quartz powder to the resin. Save the nicer crystals for HHGs.

[kuloliku]

what kind of materials is the swing generator assembled from.

[lofas23]

@kuloliku The cone and stop are both made of resin with aluminum and copper. The cone has 5 crystals and a neodymium magnet.

[Pietromas05]

is long pipe connected with the short one inside?

[lofas23]

@Pietromas05 The long pipe doesn't come in contact with the cone. It stops a couple inches above it.

[Truedust]

Thanks a lot for this Video!

[ammer1010]

everyone uses this gnarly resin isnt there an alternative?

[kuloliku]

Of what material is made up base? "Pulzor"