DIY GUITAR - Part 10: The Headstock
Loading...
Loading...
17,549
Loading...
Uploader Comments (DUY1337GUITAR)
see all
All Comments (19)
-
HEAVY: OHHHHHH THIS BAD... NO!!! WILL NOT RISE!! RAAAAAAHHHHHHHHH!!! NIET! WHO SEND ALL THESE BABIES TO FIGHT!
-
EYE CANDY *-*
Loading...
4:11
DIY GUITAR - Part 11: Applying Sanding Sealerby DUY1337GUITAR22,116 views- 1:44
JB Jeff Stainingby jb20606,690 views
- 0:50
Pete Skjold shows off enhanced quilted maple topby BassGearMagazine22,242 views
- 3:57
"Tigerstripe" LP Part 3by jwhambone7964,474 views
- 4:01
DIY GUITAR - DEMOby DUY1337GUITAR20,560 views
- 2:17
Apply waterslide decal to guitar headstockby decalmadness5,362 views
- 2:08
DIY GUITAR - Part 6: Grain Fillingby DUY1337GUITAR24,980 views
- 3:03
Making the slotted classical guitar headstock instructional videoby macdige14,468 views
- 0:58
How to Mix Wood Stains to Create Custom Colorsby ronhazelton27,713 views
- 10:00
Build a Guitar, Part 1, Neckby buildaguitar101,384 views
- 7:33
How to color burst a guitar using the rub-on method with dye.by xadioriderx16,937 views
- 4:13
DIY GUITAR - Part 15: Scalloping and Finishing the Neckby DUY1337GUITAR31,734 views
- 0:55
DBZ Guitars - How to Build a Guitar Headstock Time-lapse VIDEOby DBZGuitars4,418 views
- 0:45
DIY GUITAR - Part 2: Supplies from ReRanchby DUY1337GUITAR17,298 views
- 8:41
Refret Tutorial Chapter 2by FreddysFrets8,305 views
- 9:41
Burst dye finish applied to a quilted solid maple drum shellby drumfoundry129,746 views
- 6:11
FENDER NECK RE-FINISHINGby alexis221woodworks4,417 views
- 5:30
Teddy Zane Shows you an easy way how to paint a guitar body with spray paint! or custom Guitar Heroby teddyzane63,479 views
- 5:06
Sully's Guitar Garage - Refreshing a faded flame top strat bodyby jsullysix14,554 views
- 4:25
JB OC Staining First Coatby jb20605,968 views
LOL in the beginning it sounds like hes screaming "RIIIIIICE"!!! XD THAI RICE!
iRant4u 11 months ago 11
@iRant4u
Lol, good one
DUY1337GUITAR 11 months ago
@duy1227guitar never the less he is right. if you clamped it a bit better and used a block of wood you would save ripping and ruffness in the veneer (no I don't know how to spell sorry) Anyways his advince is good he simply is trying to help ^_^ btw the guitar is verry good so far been watching since part 1 verry good so far ^_^
snakev10v5 1 year ago
@snakev10v5
No, I had problems with that guy, he keeps going around my videos bashing about how he knows better (in a rude way), which is of course annoying. If he commented in a different way, I wouldnt have mind it. And about the veneer, the rough edges does not matter, that's why I went ahead and used a knife. The washers would cover them in the first place. When people drill headstocks, there are chips on the other side of the hole anyways.
DUY1337GUITAR 1 year ago
also, please dont take these as insults, but... when ur cutting through the venners , if you ever plan on building another guitar... a plung router works better, but is a little bit trickyer to use. and for the tuner and knobs , use a clamp and clamp on a thivk piece of wood, 1" thick is fine. and drill through the venner into the wood. it will eliminate flacking or tear-out. and use clamps for the glueing their a shit load more pwerful that bibles lmao
CemetaryGatesML 1 year ago
@CemetaryGatesML
nooo, I'm not taking them as insults, but I find them rather annoying because you're crapping your own methods with your balloon full of ego everywhere in my videos.
DUY1337GUITAR 1 year ago