Losi Micro Crawler First Drive w Basic Upgrades
Uploader Comments (AtomicMods)
All Comments (214)
-
which one would you get, the losi micro crawler, or an axial scx10 trail honcho?
-
should i get this or the micro t
-
Would these work with the MINI crawler
-
@MrDavidfuchser Don't worry, it really is ridiculous that the springs were so stiff. I got sick of them within a minute, so I pulled them off and started running a droop setup.
-
wht is the grey part of the track made of
-
is that humming the song or the slow speed of the motor?
-
well a realy micro crawler is it not i saw in the scale 1: 87
-
Can't believe how stiff it was without the mods. Proof that some manufacturers are uninterested or incapable of making kits that perform well. How difficult would it have been for them to drive the final prototypes and soften the spring rates before full scale production began? Oops, I'm ranting again.
-
i want it!!
-
@dirtshower250 Nope, but it wouldn't be hard to make it water resistant.
what type of motor are you running. because my 7.4v lipo battery burned up the stock motor
dath1996 8 months ago
@dath1996 Weird...We were running the stock motor and didn't have any issues.
AtomicMods 8 months ago
@AtomicMods if i was to buy another motor for it what motor should i get?
dath1996 8 months ago
@dath1996 I would just replace the stock motor. If you converted to brushless you would probably destroy the drive train. You could put in a mod motor, but then you couldn't run the Lipo.
AtomicMods 8 months ago
I have a losi micro crawler, i need to know what weights to use and how much weight i should use. I have already put the battery on the front servo so what else can i do to make it crawl better? Thanks
KrAzEyFaRt 11 months ago
@KrAzEyFaRt ... Defiantly do the droop mod on the shocks. The weights we used were the regular stick on weights you would use for a full sized crawler, we just cut them to fit. I believe we did one full wrap per wheel.
AtomicMods 11 months ago