hydrodip success
Loading...
NOTICE
This video contains an audio track that has not been authorized by WMG. The audio has been disabled. More about copyright
Uploader Comments (norcaljeepdotcom)
All Comments (19)
-
did you spray them with paint before?
-
go faster on the dip and the film will wrap the bottle, when you go slow your allowing the water to beat the pattern and it will never wrap like that.
-
good 1st attempt but where your graphic was missing on the Blue bottle, you should have rolled the bottle into the graphic instead of just lowering it in. lowering a rounded object will distort part of the graphic and also create a void like yours did. Rolling a round/cylindrical object is not the same a a flat faced object.
try again but when you get 1/4 or 1/2 way in...begin to roll the object to coat it.
Good luck
-
Corona extra :D
-
What Temp is the water
-
you should have rolled the bottle... not tried to stretch a seam... watch videos of ppl rolling things like scopes and stuff... you will be impressed...
-
middle always goes first and if it touches the water you have to let it go
-
when youre placing the film in the water you want to hold it in opposite corners and place the middle in first.
-
you completly fucked up
-
@sziss5 it's $100 for a whole kit. with the kit you could do your xbox, controllers and a bunch of other stuff.
3:43
Playful Paper Backgrounds Cloth Paper Scissors Previewby InterweaveVideos96,039 views- 3:11
Hydro Dipping Dirt Bike Fender in New Tankby Onehorseracing17,676 views
- 0:25
Hydrographics- Dipping my hand in carbon fiber filmby ElPasoPowderCoating177,570 views
- 2:42
Hydro Dipping Dash in Carbon Fiberby Onehorseracing40,323 views
- 1:50
Grinding a Bike at Autoramaby uncledeercamp2,197,922 views
- 3:22
Oregon Hydrographicsby clnmp8614,155 views
- 2:12
Hydro Dipping Motorcycle Gas Tankby Onehorseracing21,168 views
- 0:39
12 Gauge Camoby tripwire3616,550 views
- 0:28
Hydraphics Custom Dip Kitby hydraphics120,903 views
- 0:42
Hydro Transfer Printing Helmet Reaper Patternby Code9mm45,079 views
- 32 videoscamo dipping
- 0:43
Dipping Carbon Fiber Wheels Hydrographic processby Waldochs52,416 views
- 2:14
Oregon Hydrographics RE-UPby clnmp8622,478 views
- 2:50
New Bonz Camo Gun Stock Water Transfer Printingby georgiahydrographics32,781 views
- 4:09
CARBON SU TRANSFER KAPLAMAby REALGOLDCOMPANY15,292 views
- 1:42
urban camo for a gun .by johnjayrambo1111119,003 views
- 3:55
Water Transfer Printing (Freedom Graphix)by FreedomGraphix9944,456 views
- 0:31
Richey's "Where'd It Go?" Camo Dippingby RicheysGunAndArchery7,813 views
- 2:45
Plastidip wheelsby 97dsmbishi55,437 views
- 5:44
DIY camo gun dipping kit hydrographicsby Liquidcamo12122,700 views
- 1:59
Hydro Dippingby Onehorseracing33,654 views
miss a spot on the blue one.... nice did you do the second one or did a pro do it for you? lol at the Walmart dip tank
note: tape = no proper notion of how this is done.
look around you tube the actual company's that do this don't use tape because it dosent let the film expand and settle like it should.
those e-bay dip kits are a gimmick for people who believe in that stuff!
vetts102nv1 5 months ago
@vetts102nv1
i did them all myself. I seen them using the taped edge. I cut slits into it so it still expanded but slower than if i hadnt.
I never claimed to be good. infact it was my first few attemps. and they came out badly. but with practice i belive it will work. I'm no way claiming to be a hydrographing company either.
norcaljeepdotcom 5 months ago
Roughly, how expensive is it to hydro-dip the size of a xbox controller.
sziss5 6 months ago
@sziss5
it depends on how u do it. there are companies that make a kit. most of them are a camo pattern. if thats what you want then its not that expensive bad.
if you buy the supplies like i did, you get a lot more material than what u need to do a controller. but the price was about the same as the kit. i bought my stuff off of ebay.
norcaljeepdotcom 6 months ago