New Crossing Lights on the DT&I
Loading...
Uploader Comments (YoShaunBoySup)
All Comments (22)
-
With these signals and a custom controller, did you have to add resistors for the lights or are the resistors pre-assembled as part of the crossing signal? Thanks for any help anyone can give!
-
i have a model train set with a steam engine but do you have to have wires on the controller or do you just pug it in
-
@disneyfan81 Many crossings along the B&O/DT&I/C&O in Ohio just have lights. That's slowly changing, but this is still accurate. The new layout will have plenty of gated crossings, however. You should check that out at youtube(dot)com/ModernDTI. This layout was dismantled years ago!
-
No gates?
-
@cvgeeps No, I made up the logo specifically for the car just for fun. I thought it turned out nice. :-)
-
Was the DT& I Cryo car prototypic??
-
Cool
0:44
HO crossing BNSF Autoracksby 1218611229,071 views- 0:38
New DT&I Coal Trainby YoShaunBoySup12,083 views
- 0:09
Model Train HO scale - Life Like Roadroad X ingby perrymak2000383,782 views
- 2:16
Westbound CSX freight at Northeast Pa.by dumbbuff16,957 views
- 1:38
model railroad crossing gatesby cpguy29265,609 views
- 1:15
Czech Level Crossingby kurvjuh5,818,675 views
- 1:20
CSX Mixed Freight at Cedar Street Crossing, Brookfield, New Jersey - Part 1 - 01-11-10by UFO4X13,171 views
- 0:43
Walthers traffic signals.by casslakechris296,121 views
- 0:45
Working Crossing Signals on the Model DT&Iby YoShaunBoySup34,155 views
- 0:25
Crossing Gate Model Train Controllerby gabeknuth1,281,861 views
- 0:22
The railway crossingby fatgarfieldebay75,364 views
- 0:37
HO Grade Crossing With LIGHTS On The Gatesby DHMRRC14,988 views
- 1:01
Train Sim QUAD-Gate crossing demo.by Rrxingrick2,933,945 views
- 4:50
Hazelhurst Sub Actionby johnrf84362,677 views
- 2:10
Railfanning St. Canard - Jan 2007by spiderj76533,657 views
- 0:46
MAJOR TRAIN DERAILMENT!!!!by Villagemaid1,176,707 views
- 1:46
MCER 960 At River Run.by skyman200274,419 views
- 5:01
Some Blues From Rod Piazza Love Doctor Along With Some Railroad Crossing Signalsby ROCKDOG573234,482 views
- 0:40
VIA 20 - Québec, QCby mlemay197549,289 views
Everyone listen up: DO NOT buy the Walthers Crossing Signal Controller if you have, or plan to upgrade to DCC. As it says in the package, the controller is only for use on DC layouts. DCC systems can damage the controller.
royalflush5000 8 months ago
@royalflush5000 This is specifically why I did NOT use the Walthers controllers. If you read, I used LogicRail, which are 100% DCC compatible. Only the signals themselves are from Walthers.
YoShaunBoySup 8 months ago