3M Di-Noc Carbon Fibre Vinyl
Loading...
Uploader Comments (3MUKPLC)
Top Comments
-
really kills me to see al that vinyl wasted. I would love to have all them scraps
1 year ago 15
-
@Manhitbybus for beginners its better to use hair dryer.
1 year ago 4
All Comments (46)
-
What color is the di-noc used in the video?? is it black or graphite???
-
@CarbonJohn thanks captain obvious... if you do not want to spend $200 to carbon fiber mold a peice of plastic you buy this...
-
@A51D you can clear coat it...
-
I'm sorry thats not real carbon fiber...
-
If we sprayed a clear coat over it would it still have the same shine?
any drawbacks from doing that, besides the obvious one of not being able to take it off.
-
VEND ROULEAUX 3M DI NOC CA-421 CARBONE 1,22 X 12 METRES PRIX 820 EUROS POSSIBILITE DE VENDRE 6 METRE 450 EURS 06 66 10 97 76 ledainpascal@hotmail.fr POSSIBILITE D AVOIR PLUSIEURS ROULEAUX SUR DEMANDES A RECUPERER OU DEPLACEMENT EN ILE DE FRANCES
-
shame it doesnt have a gloss finish like real carbon fibre
-
@3MUKPLC Thanks very much for your response! Now, onto a perhaps rather silly question.. I am having a hard time finding Canadian distributors for the Di-Noc film. I would rather buy at a store, than online/eBay. Could you please point me in the right direction? TIA
- 3:38
Mercedes CLS full Car-Wrap in 3M anthrazit metallic mattby carwrap11Featured Video791,315 views
- 7:40
3M SMART Repair Processby 3MUKPLC47,323 views
- 0:58
3M Die-cut Tape Against The Clockby 3MUKPLC497 views
- 6:49
3M Car Care Rangeby 3MUKPLC8,936 views
- 2:04
Warranted Roofingby 3MUKPLC2,445 views
- 11:39
DIY: Wrapping Rims in Matte Black Vinylby portabuddy500,289 views
- 1:18
Carbon Interior Trim Conversion (Neffy Wrap)by foleygac102,578 views
- 0:25
Hydrographics- Dipping my hand in carbon fiber filmby ElPasoPowderCoating177,570 views
- 1:43
How to Apply Carbon Fiber Vinyl (3M DI-NOC) on Simple Interior Partsby AutoHowTV36,409 views
- 5:52
Cavitacionby albertodelest67,690,138 views
- 3:16
Miro-Folio - Audi S5 Chromeby Yaskata109523,228 views
- 0:47
How To Apply 3M Di-NOC Carbon Fiber Vinyl Filmby carbonfibervinyl46,767 views
- 3:52
Zmiana Koloru Auta - Porsche Cayenne [Carbon 3M]by strefa80,716 views
- 0:31
3M Carbon Fiber Di-NOC - CarbonFiberVinyl.com Before and After Picturesby carsponsors21,650 views
- 6:40
CARBON 3Mby remusdale185,993 views
- 1:17
3M™ Scratch Removerby 3MeStore445,669 views
- 9:36
How to cover parts in carbon fiber (fibre) by skinning or wrappingby carbonmods1,022,221 views
- 9:30
3M Di-Noc Carbon Fiber Vinyl Racing Stripe Installationby StickerCity80,264 views
- 0:44
Our customer made this video wrapping his hood with 3M Carbon Fiber from CarbonFiberVinyl.comby carbonfibervinyl42,791 views
- 4:21
Zmiana Koloru Auta - Audi A5 [Carbon 3M]by strefa149,962 views
@3MUKPLC So if you use heat to mold it, would it be a good idea to put on exterior pieces? Due to heat from sun.
oROMINEo 9 months ago
@oROMINEo The heat from the sun could soften the film in hotter climates than the UK, but not enough to alter where it is conformed to. High heat is used to conform the film during application using a hot air gun, we're talking upwards of 60 degrees centigrade.
3MUKPLC 9 months ago
No primer needed?
vVeazel 11 months ago
@vVeazel Primer is required on leading edges, such as the wing mirrors. No primer was used on the roof partly due to the fact that the roof is a gradual curve.
3MUKPLC 11 months ago
Do you apply anything under the film or is it a clean, and stick type of thing? and hows the durability and if it'd come off easly after ware and tear.
Loecked 1 year ago
@Loecked The surface must be squeaky clean in order for the adhesive to bond fully to the surface of the car. Nothing needs to be applied beneath the film. DI-NOC is fully removable, heat is required to soften the adhesive making it easier to remove.
3MUKPLC 1 year ago