side lever project .wmv

A short clip of my latest project, a sidelever operated PCP airgun. As you can see there is still some work left to do..

Category:

Entertainment

Tags:

• side
• lever
• project

[bazengao]

you could come up with a way that at same time you pull the lever it cocks the hammer thus making you action only... now to serious buiseness where the hell can i get 1 one of those books and where i can find as much tools as you probably have?! pls answer!!

[ulanbatorgator]

@bazengao Hi, if you look at my other clips you'll see that the lever both operates the bolt and cocks the striker. If you mean Mr Buckleys books i suggest you have a look at my friend Pedros website "airgundevelopment(dot)com" for Mr Buckleys contact details. Tools... buy used, good quality stuff, stay away from cheap low quality tools.

Cheers

[SpeedyNecrosis]

Nice! I see you put the transfer port in your bolt probe?

Seems like that;s handy for easy cailber changes!

And a small question, How did you drill the long hole to make the bolt /barrel fit?

I have been thinking on how to do this for a long time and I allways keep comming to the conclusion that I can't get that hole perfectly straight...

Cheers from the Netherlands!

[ulanbatorgator]

@SpeedyNecrosis

Thanks!

I drill all the long holes with a home made boring bar in my lathe. Boring bar in lathe chuck, bolt the workpiece to the crossslide and feed it towards the boring tool. For even better accuracy you can make a "boring between centers bar". Might be hard if you go for a 10mm hole, but anything bigger than that should really not be that hard.

Cheers

[alehax27]

interesting transfer port design.

[chilidress]

can you make a tutorial of the inside mechanism??

[bazengao]

@ulanbatorgator TY^^

[carnage6ar]

so u need a lathe to do this and u cant get those parts ne where right?

[togaida]

Very nice job. I like the last video, too. Where'd you get the barrel and pnuematic cylinder? Cheers from the USA!

[lilArabWarrior]

that is very awesome. good work!