http://www.etrailer.com/tv-demo_erikson_car_tie_down_ratchet_strap_08424.aspx
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This is a 2 inch by 8 foot long, 10,000 pound rated tie down with a built in axle strap. We'll show you some of the finer points of this device and how it works. Starting with the ratchet, it's slightly better than most as it has a bit longer handle for extra leverage. This unit also has larger hooks compared to others, the same applies to the axle strap. Some models have this coming straight out in the hook, which makes for a twist in the webbing. With this model here the hook is actually twisted and does one continual loop basically with no twisting. This axle strap is adjustable in the length here with this buckle. So you can make it as large or small as you need to. We'll now demonstrate how this works.
We have our little mock up here and we'll start off with the axle strap itself. You can see the red padded section touches your axle and we'll go here to the ratchet and tie it down where you want. Once you have that accomplished it's a simple matter of tying it down and taking up your slack. You can see this is still protecting your axle and it's well secured to your axle here and your car will be properly secured. There you have it for part # 08424 from Erikson Manufacturing.
Link to this comment:
All Comments (0)