JG G36c dissasembly part 2

part 2 of my JG G36c dissasembly

Sorry for the low volume, the Flip cam doesn't record very loud, just turn the volume up a bit.

this is the gearbox dissasembly

Category:

Howto & Style

Tags:

• JG
• G36c
• g36
• jing
• gong
• airsoft
• dissasembly
• review
• upgrade
• air
• soft
• aeg
• gun
• bb
• 6mm
• madbull
• modify
• echo1
• echo
• v3
• version
• gear
• box
• gearbox
• mech
• mechbox
• mechabox
• mecha

[CrazyDog0527]

What happen if you dry fire to much cause my g36 broke the bb won't come out

[DisguisedAirsofter]

@CrazyDog0527 Nothing happens if you dryfire.

[AirsoftXManiac0121]

where would i buy a whole gearbox already put to gether including the frame

[DisguisedAirsofter]

@AirsoftXManiac0121 You can either buy a full JG/E1 g36 gearbox or get a SRC and put a motor of choice on it.

[fightingdragon93]

if i was going to get the JG g36k for around 150, what upgrades would you recommend? The KWA is 285 stock, but the parts are proprietary. Is it possible to upgrade a JG is surpass a KWA without going past the 285 mark? Surpass in terms of durability, accuracy, and decent ROF on an 8.4v.

[Mrairsoftraptor]

@CrazyDog0527 It might not be your gun. The same thing happend to me. I found out it was because my mag was broken.

[cbbuckster]

Hi mate great vids I'm looking to upgrade my gun as it was last chrono'd at 300 some good advice thanx

[ostsoppa]

Great videos man!

I have a problem with my G36, the nozzle doesn't withdraw enough to let the bullets into the barrel. Have you dealt with a problem like that before and do you have a solution to it?

I am thinking that it might be a problem with the cylinder head...

[AirsoftXManiac0121]

im prolly gone get a full 1 but where can get 1

[DisguisedAirsofter]

@thomson728 On average... $35 barrel $6 bucking $12 spring guide $10 spring $15 bushings $2 shims $5 to deans your gun, batteries, and charger So roughly $85 I also recommend stretching the o-ring from your piston head over the cyllinder, coating it in silicon grease, and heating it with a lighter quickly to stretch it for a better seal if it doesn't already have a good seal.