Start Sewing- Persistent Thread Breaking
Loading...
Loading...
26,112
Loading...
Top Comments
see all
All Comments (8)
-
at 0:12 is that an ambulance making that noise
-
my sewing machine keeps pulling the top thread up and out of the needle and i dont know how to solve it help!!? x
-
@Karicar90 I love you - just discovered I had the same problem!!
-
thanks a lot!!!! i'm just buy sewing machine and in the hand book not clear for me . watch your video is easier.
-
your video answered all my ?
Loading...
1:32
Start Sewing- Stitching the Patternby FilmedCoUk160,237 views- 2:48
Start Sewing- Hemming a Garmentby FilmedCoUk46,407 views
- 4:46
Start Sewing- How to Thread a Sewing Machineby FilmedCoUk651,835 views
- 1:35
Start Sewing- Incorrect Thread Tensionby FilmedCoUk106,355 views
- 7:23
Sewing Basics 1: How to thread your machine.by mojoroneno25,302 views
- 9:42
How to Use your Sewing Machine (for Beginners)by FreckledNest353,737 views
- 2:22
Common Tension Mistakes on Sewing Machines - Part 1by Sailrite121,986 views
- 4:49
How to fix Tension; Don't Panic!by Bluwhodesign55,304 views
- 2:14
How to Sew: Using a Serger : Introduction to the Serger Sewing Machineby expertvillage94,550 views
- 5:57
How To Thread A Sewing Machine Ruth Sewing Roomby THESEWINGLADY115,783 views
- 2:35
Trouble Shooting a Sewing Machineby monkeyseevideos27,805 views
- 6:44
Bobbin problem on Singerby CandiceMi555,241 views
- 8:27
Installing bobbin and threading the needleby prostiedvizhenija62,027 views
- 0:28
Uncommon Ideaby jobfair121,566 views
- 8:42
How to wind and install the bobbin, and thread the sewing machine: PART #1 (Winding the Bobbin)by lanido1366,219 views
- 7:41
sewing lesson 1by Bluwhodesign57,900 views
- 2:10
Toyota Sewing Machineby IMAGINETI25,301 views
- 2:23
How to Thread an Industrial Sewing Machineby raphaelsewingVIDEO55,994 views
- 1:00
How to use tension knob on a Kenmore vintage sewing machineby SadieSummer20,601 views
- 2:38
How to Machine Baste: basic sewing technique video tutorialby sewmarm54,954 views
u waste so much thread! lol. helpful videos though.
chicharwali 2 years ago 8
i have a very similar machine and for a while the thread kept breaking i did as the video showed but the thread kept breaking, i examined the machine and found that the needle was on backwards sure enough the machine started working properly again. Yay! moral of the story, make sure your needle is in right! =)
Karicar90 1 year ago 4