http://www.mycoolheli.com Use your Tx Rudder channel Travel adjust to adjust max Piro rate in Heading Hold. Not the gain, not the limit dial on the Gyro. Gy48V on EXI 450 shown in example. JR290G tail servo.
Verify limit dial allows full travel when rudder stick is fully to the right but without binding in Rate mode.
Verify you can hover with little (but some) drift in rate mode. Or move servo on boom to compensate. read the setup instructions on my website on the review page for the GY48V at mycoolheli
Great video. I accidentally adjusted something I shouldn't have and now the heli piro's to the right really fast (like your 130%) while piro's to the left are slow (like your 75%). Any idea's on what I did to make this happen? Using a Spectrem DX 6i with a Belt 2.
@jasonalara
Check travel adjust.
Verify limit dial allows full travel when rudder stick is fully to the right but without binding in Rate mode.
Verify you can hover with little (but some) drift in rate mode. Or move servo on boom to compensate. read the setup instructions on my website on the review page for the GY48V at mycoolheli
Blueray450 1 year ago
Great video. I accidentally adjusted something I shouldn't have and now the heli piro's to the right really fast (like your 130%) while piro's to the left are slow (like your 75%). Any idea's on what I did to make this happen? Using a Spectrem DX 6i with a Belt 2.
jasonalara 1 year ago