Xbox Controller to USB Part 1

Here is the hands-on part of this tutorial. It will show you how to solder the USB (male end) to the Xbox Controller end.

Requirements:
Soldering Iron
Solder (May not be needed because there is some solder on the pins.)
End of an Xbox Controller
Spare USB cable. (The male end.)

Disclaimer:
HowToHacks90 is not responsible for any damage you may cause on yourself, Xbox cable, or USB plug. Please be very careful when using a soldering iron. Most solder contains lead so wear safety goggles when soldering. Don't eat solder either... It may look fun to chew, but don't cry when you get lead poisoning.

Category:

Howto & Style

Tags:

• Soldering
• SolderingIron
• Xbox
• Cable
• Wires
• Stuff
• HowToHacks

[xXSlyEyesXx]

so itll act like a wired and let me play games on pc with the controller?

[HowToHacks90]

@xXSlyEyesXx Yeah If the game supports gamepads, than it should work fine.

[maxson6]

do you HAVE to solder the wires?

[HowToHacks90]

@maxson6 How many times do I need to be asked this. And YES USE A SOLDERING IRON!

[HowToHacks90]

@maxson6 How many times do I need to be asked this. And YES USE A SOLDERING IRON!

[369963jordan]

DOES DIS ACTUALLY WORK...?

[HowToHacks90]

@369963jordan yea

[PimSchaaf]

@HowToHacks90 You don't have to solder. You can just twist the wires. Check out my 7-step guide on my channel or watch?v=R5Z62fsPonU

Thanks for your video though!

[PimSchaaf]

@maxson6 You don't have to solder. You can just twist the wires. Check out my 7-step guide on my channel or watch?v=R5Z62fsPonU

Good luck!

[gtobandit1]

you dont really need to use a soldering iron wire tape works well just twist the wires. that is what i did. or just get wire nuts

[Durken316]

@maxson6 No you dont have to it just makes the wired more stronger just use electrical tape and your good :D

[angeloffire100]

I am going to do just that . But if it does't work I will send u the bill xD.

good work