DRIVESHAFT NOISE
Loading...
Uploader Comments (PATKANY71)
All Comments (10)
-
?
I have The same problem right now . I feel very amazed at how the sound is the same !
crazy shit what was the probleM?
-
that has to be your flywheel,
-
honeycomb loose/broken in the catalytic converter? do you have a CEL on?
-
Manual shift : Check again whilst stationary and in neutral. Clutch in and see if the noise goes away.
If it does then its clutch release bearing.
Auto: Gearbox related not sure what it could be, torque convertor maybe
-
Huh? Driveshaft noise? You didnt even turn the tires the slightest, which means no driveshaft movement... Thats the sound of your exhaust. You can check a driveshaft for noise with the engine off by shaking the shaft different ways and checking for excessive play.
-
Your talking about that sound without moving or shifting..
Exhaust. - sounds like some metal broken and bouncing around from the air flow.
-
cv joint its is the half shaft
-
your not moving. not the drive shaft buddy
1:03
what's that noise? drive shaft bearing or hub bearing?by rhayan91132,583 views- 4:34
Bad Drive Shaft Sound Jeep (Maybe Your Problem) U Jointsby DillonsJEEP20,557 views
- 0:52
how to check bad cv joint noise on your car, read vid desc. for moreby myturbodieseld0tcom19,060 views
- 0:33
driveshaft testingby Carbon106gti8,770 views
- 0:29
Bad U-Jointby Outsane11,162 views
- 1:21
Grinding noise -- Need advise!by mckieutoop7,635 views
- 0:20
what a wheel bearing shouldnt sound likeby dakotabeeson78,335 views
- 0:54
Whats this grinding/rattle noise?by rinker1730,337 views
- 0:08
Wheel bearing noiseby dutchhopto25,681 views
- 3:19
car noise, maybe wheel bearing?by JazzFedoraKid7,073 views
- 0:29
Annoying clunkby limitedslip7,954 views
- 0:35
clunk sound from steeringby fastyellow742,059 views
- 0:21
How a worn wheel bearing sounds.by Bobbyhax63,791 views
- 1:39
Listening to bearing noiseby realfixesrealfast135,231 views
- 3:14
steering column noise and bindingby alikhanmir1,625 views
- 1:25
bad pinion bearings.wmvby WarrenAutomotive12,043 views
- 0:14
Clicking axle? Maybe this is your problem...by CORVAIRWILD232,721 views
- 4:45
Spider gear tilt causing "clunk"? (PLZ read desc.)by RedneckSophisticate18,407 views
- 2:02
Desert4wd - Looking for the Clunk!by desert4wd31,618 views
there isn't any problem, follow the maserati Life forum and you'll see..avoid leaving the car in idle running without engaging a gear for long periods of time, no problem but a safety thing built into these cars.
PATKANY71 1 month ago