Multiplex Fox rc

http://www.rcpilot.hu/gall/repulo/73/20090318130657/multiplex_fox.html

Multiplex Fox ,alieron 3,7g servo , elevator 3,7g servo , 6g-6A turnigy esc , 2s 250mAh , 10g motor , gws 5x4,3 , Spektrum AR6100 =83g (2s 250mAh+5x4,3 prop=25min)

Category:

Sports

Tags:

• multiplex
• fox
• rc
• plane
• modell
• model

[rcelektro]

Single alieron 3,7g servo , elevator 3,7g servo , 6g-6A turnigy esc , 2s 250mAh , 10g motor , gws 5x4,3 , Spektrum AR6100

[rcelektro]

83g

[rickmacalpine]

hi! excellent clip!!!! have a look at my video, maybe you can find some tecnical inspiration too. greetings from vienna!

[wickedinsight]

@th3dud3007 take a look at my fox video, i show a close up of where i mounted the single wing aileron

[RCWOZDUDE]

part two !!! the canopy pops right off it's not glued or anything but there is a ball bearing in the canopy for weight, pull it out you won't need the extra weight anymore. hollow out the fuse behind the firewall and back where the wing is leave the center section that way you can pop the canopy right back on. put esc behind fire wall put micro reciever and wires infront of wing the rest I think you can figure out!!! IF NOT!! don't bother building one!!!

[FrostbiteUK]

You have inspired me to convert a Fox. Did you use a hot wire to cut open the rear of the fuselage? Any cutting tips?

[Free07Style]

I get 15 minutes with a 9g motor, 5x3" prop and 360mAh LiPo at half to full throttle all the time. When you are gliding more 20+ minutes are realistic

[Free07Style]

You can control the roll with a single aileron, but it less efficient as having two. I use two on my Fox with a single servo and I will use a two servo setup for the next that I will build soon one to mix flaperons for better slow flying characteristics...

[Free07Style]

I have the same setup except for the motor (9g, 5x3") and LipPo (Rhino 360mAh). I did - as you suggested in your question - glue a small firewall with hot glue and fix the motor on it. There are only little forces up to approx. 120g-150g on it. I will a video occasionally...

[issr7]

Hey how did you mount the motor to the plane ?did you glue some wood in there and screw it ?

[th3dud3007]

Nice vid, just ordered a fox and was wondering, how and what is a single aileron? Neever heard of, well I am still a newbie. Where did you put the servos? Thanks for the vid, was fun to watch!

[stevecoterell9]

very nice .s