Valve Guide Repair Sleeves Demo Part2
Loading...
Link to this comment:
Uploader Comments (rapidindust)
All Comments (14)
-
can i use a kick stand ... and put that thing in a dark place....
-
@marek0086 Alright well it sucks, im telling you, go get a bike chain and put it out in your shop end put wd40 on it, wait about a day or to and its gonna be rusted to hell
-
@oSHOLLIVERo~ of course its a lubricant!
-
@toblertwo that just explains why when i oil my chain with it, it gets rusty as hell, i promise, if your going to use something use 3 in one oil
-
@oSHOLLIVERo That's not what the can says. Doesn't WD stand for water dispersant?
-
Nice vid. Thanks for for your time.
I learn something new.
-
safety glasses wouldn't hurt
-
wd40 is not a lubricant, its a degreaser, DONT EVER USE IT
-
we got a good hole!
-
If you trim the sleve before you burnish it you wont have the burr problem and will not need to chamfer the ends and risk creating an oil funnel, also the funneling problem is only important on the top side.
2:12
How to change Valve Seals on Engine head.wmvby juniorrc200310,661 views- 6:37
Valve Guide Repair Sleeves Demo Part1by rapidindust11,786 views
- 0:19
Vacuum Test Reveals Worn Valve Guide Seals (Short)by CorvusCasull20,580 views
- 4:45
How to relieve Combustion Chambers on high-performance V8 heads,5th of 5 angle valve seat jobby Aussieheads113,880 views
- 2:05
How To Port and Polish a Turbochargerby ProjectCarTV32,463 views
- 2:11
piston scuffingby johnschwaner46,450 views
- 0:58
Testing for Leaking/Bent Valvesby bgoodrick27,415 views
- 3:59
How-To: Inspect a Hydraulic Valve Lifterby MechanicDave8467,100 views
- 4:16
How-To: Polish Cylinder Head Exhaust Portsby MechanicDave8499,546 views
- 0:22
Block Honingby carpartsmachine106,575 views
- 12:11
Fitting new valve guide seals without removing the cylinder head Suzuki Vitaraby richardcloudbase39,668 views
- 11:35
How to Reseat / Lap Valves (Basic Valve Job)by fnaguitarplayer942,166 views
- 4:20
Quick valve job with 3 angle form carbide blades..wmvby cylinderheadshop19,639 views
- 3:53
Engine Rebuild 101 - Part 4 - Cylinder Honingby submarineboat18,247 views
- 4:35
Briggs & Stratton Rebuild - Pt. 1by TheAstro3011,439 views
- 1:59
How to resurface your cylinder head without a 16 ton milling machine.by BuBliEz452,965 views
- 1:09
Edelbrock RPM Olds 455 Head Portingby HeavyOlds274,797 views
- 1:10
Part 2: Not bent valves!by krismaze28,808 views
- 0:35
JBV RACING SERDI CRF HONDA 450by guppyracing9,999 views
Never heard of using a ball to size the inside of a valve guide before. How doe shat effect the cross hatch?
salemcripple 1 year ago
@salemcripple The use of a carbide ball is the perfered method of sizing the guide liner. The cross hatch or for Rapid liners the diamond pattern remains in the liner the same as if you used a brouching stick.
rapidindust 1 year ago