Easystar Fatal Crash RIPieces FPV
Uploader Comments (fl3tz)
All Comments (9)
-
@Espenrc he didn't! It was freaking out all over the place ;)
-
Looks like you hit the freaking road. If so what luck!
-
Damn. You already started having disturbed reception with servos wiggling a good time ahead of the crash. Was you transmitter battery dead? Should have landed quickly with first signs of receiver trouble. :-O
Good luck on future flights...
-
Oh my godness!!!
nose down straight to the ground, that really hurts Mr. Fi3tz.
Right after the take off, I can notice you getting heavy interferences, maybe the speed controller or motor or thick wires was too close to your R/C receiver.
I had the same kind problems in the past.
Well, the only way to never crash an airplane, is never fly it :)
Take care,
HobbyWireless Online Store
-
Hi. Sorry, ich komm gerade nicht in meine mailbox. Und auch sorry für den Easystar! Wobei, Easystar geht ja noch, reparieren oder neuer Rumpf etc. Habe zusammen mit einem Kollegen etwa 6 Easystars "verbraucht":-) bis flying skills und hardware passten. z.B. CFK Stäbe unten und oben im Schwanz (vom Eeasystar, hi hi) verhindern dass er beim crash bricht - denn dann sind meist die Servos kaputt. Ich plane eben, einen bösen Airliner mit FPV zu fliegen, aber bis dahin... meld mi morgen
-
Autsch, das ist wirklich böse...mein Beileid :-(
Das arme Fluggerät! Hast du anhand des Videos ermitteln können, was den Absturz provoziert und letzendlich ausgelöst hat?
ploetzlich30 2 years ago
Hi Ploetzlich30 ...
Ich habe jetzt ja auch schon mein Setup sehr weiterentwickelt. Ich bin mir mittlerweile sicher, dass der 2,4 Video Transmitter einfach zu dicht an den Servos und dem Controller war. Und diese Einstreuungen haben einfach gestört. Sender und Empfänger müssen einfach möglichst weit von einander entfernt sein.
Greeetings
fl3tz 2 years ago
Hi nice video, i have just orderd rangevideo set..how do you get det tilt and turn on your camera on you radio??
thx for all help
Easy Star fan..
Espenrc 3 years ago
Hi ... well it was nice until the crash ;)
I just glued the cam an a servo and used the 4th channel an the radio for left - right movement.
On my new setup i use the EZpod from rangevideo to move the camera in two axis. My Headtracker is from hobbywireless and i use a futaba FF7 Radio.
Greetz
fl3tz 3 years ago