6-Bolt Mitsubishi Timing Belt Replacement

Video made my Chrysler for the Eagle Talon and Plymouth Laser demonstrating how-to replace the timing belt on the 2.0L i4 DOHC (8-Bolt) Mitsubishi engine.

Sorry, part of the video was cut.

Category:

Autos & Vehicles

Tags:

• DSM
• bolt
• Crank
• walk
• timing
• belt
• 554
• chryler
• laser
• plymouth
• Eagle
• Mitsubishi

[martinez197]

wat does it mean to have a 6 bolt or 7 bolt

[ihartmacz]

It refers to the amount of bolts on the end of the crankshaft

[ihartmacz]

That's not the purpose of the video, it's hot-to change the timing belt. You'd know right away if the valves had been bent.

[wildarms16]

@CHOPMOP10

Negative. They actually stopped the 6 bolt motors in May of 92. Some 92's have 6's, some 7's. Stupid 7 bolts getting crank-walk and shit...

[Anonymous4chanuser]

@Samacun It jumped time. 

[Samacun]

@ihartmacz if the a/c belt and the alternator belt gets damaged or literally fly off week after a timing belt change is done can that break some valves? dose it suggests a wrong installation.. My car has vary low power after a had the timing belt change but especially a week later that those other belts went off (a/c & alternator. and i dont know what else.. help please

[Samacun]

if the a/c belt and the alternator belt gets damaged or literally fly off week after a timing belt change is done can that break some valves? dose it suggests a wrong installation.. My car has vary low power after a had the timing belt change but especially a week later that those other belts went off (a/c & alternator. and i dont know what else.. help please

[countryboyG]

@OEFarredondo I did it about 3 months ago and the car runs now i drive it all over but.. like when its in park or even when your driving it it seems like if you push the gas down while its in park it takes a while to rev up.. i know the biss screw is off because if i put it in the right spot the motor revvs up to about 1500 - 2000 rpm and if i try to adjust the butterfly on the throttle body then the throttle sticks.. soo i have the biss screw to where the idles about 900 know how to fix this?

[OEFarredondo]

@countryboyG you could do with the engine inside but it would be easier to throw it on a engine stand and put her back together, also remember torque specs and PM me if you really going to get your hands dirty

[countryboyG]

i just bought a 96 eagle talon with a 4g63 that someone took the head off and has everything apart but has all new parts i need to put it back together.. does anyone have instructions or anything on how to do it.. do i have to pull the motor or can i leave it in the car?

[BigBlackBic]

please dont ever remove this video

[DarthTater84]

Would this work for a 1998 Mitsubishi GS?

Low on patience right now. Just to swap out the timing belt. No damage.

[DALE97DSM]

@miragejuan Yes, there is. Look at expertvillage for timing belt/water pump replacement. Guy in video is doing a 2.4edz Stratus but its the same steps as 420a.

Do a search, for it.