MAC OSX on PC hardware - Kalyway 10.5.2

MAC OSX on AMD PC hardware - Kalyway 10.5.2, AMD Athlon X2 64 4200+, 2GB DDR2 RAM, GF 9400GT 512MB DDR2 VRAM, Realtek 8XXX RTL ethernet. Everything working except for the graphics card (working only through VESA driver, graphics safe mode *GT 9xxx working great in 10.5.6 and higher versions of OS X).

Category:

Science & Technology

Tags:

• MAC OS X
• 10.5.2
• MAC on a PC
• Kalyway

[poiiihy]

it says mac pro on it. Are you sure its not a Mac Pro with a PC monitor?

[clarkkov]

@poiiihy LOL! Yes, I am pretty sure

[Syko946]

Kako da uzem u Safe Modu?

[clarkkov]

@Syko946 Kad podižeš sistem pritisni F8 i onda ukucaj "-x" bez navodnika.

[clarkkov]

@D36614L Try reinstalling Chameleon, try different version. Reinstall from the DVD, uncheck everything else and only select the bootloader. If it's installed correctly, it should work, just make sure it's installed on the boot HDD, or boot from the HDD on which OSX is installed if you have two HDDs.

[D36614L]

@clarkkov - Hi my friend :D Well, i've tried another distro, "iDeneb 1.5 10.5.7" on an old intel desktop PC (i give up with the laptop) and installs well :)works fine too. But there is a small issue, it seems that the Bootloader i chose (Chameleon 2) doesn´t works, because when i turn or reboot the PC directly boot on Windows :s So i don't know how to fix that problem :|

[D36614L]

@clarkkov - Hi my friend :D Well, i've tried another distro, "iDeneb 1.5 10.5.7" on an old intel desktop PC (i give up with the laptop) and installs well :)works fine too. But there is a small issue, it seems that the Bootloader i chose (Chameleon 2) doesn´t works, because when i turn or reboot the PC directly boot on Windows :s So i don't know how to fix that problem :|

[clarkkov]

@D36614L Set your HDD controller in BIOS to AHCI or if it is AHCI, set it to native IDE (or similar). Try disabling USB controller just for the installation. If this fails, try with different distro i.e. Leohazard.

[D36614L]

@clarkkov - This happens when the dvd boot for the first time, it is loading some stuff to install, all in the black screen, but then everything stops and show that "AHCI", "processor driver....", "Kernel panic" some-kind-of-error :s Can't even show the blue screen to install the OS..... Thanks in advance man :D

[clarkkov]

@D36614L Does this happen when you install the OS or when you are booting the DVD for the first time? This is a kernel issue, you need to install Voodoo kernel, if 9.7 does not work, try 9.5.