putting 15 micron paper on glass
Loading...
Loading...
8:59Flat grinding a knifeby yasennikov28,939 views
- 8:19Using Hock Bladesby HockTools65,337 views
- 1:21putting .3 micron paper on glassby Brentssharpening4,600 views
- 1:57How to sharpen a knifeby ruidesousa558,664 views
- 0:403M Red Abrasivesby JamestownTV2,128 views
- 3:06Jim Tolpin flattening boards with Handplanes (P...by TimLawsonPTSW9,503 views
- 5:28Episode 33 sharpening a card scraperby kostasworkshop3,064 views
- 9:54Why I Use Convex edges on all my knives. Non-Te...by knivesandstuff11,557 views
- 3:04JoolToolby AmericanWoodworker3,905 views
- 2:53Sharpening sessionby Brentssharpening101,396 views
- 10:00'Scary Sharp' Sharpening Method Used to Sharpen...by eceipretsam104,572 views
- 0:43putting 5 micron paper on glassby Brentssharpening4,497 views
- 6:44Plane Blade Sharpening with Rob Cosman at IWF P...by woodcraftmarketing3,518 views
- 9:05How to sharpen blades for woodworking planersby ACCBCT25,742 views
- 1:58Stone Paper by Micron Paper Inc.by adreservation894 views
- 7:58grinding primary with bench stoneby Brentssharpening11,528 views
- 4:32Sharpening a planeby lethentymill15,612 views
- 2:533M™ Performance Finishby 3MeStore95,796 views
- 2:033M Abrasives --- Weld Repair - Indapac Ltd East...by IndapacEast299 views
I have a few sheets of polycarbonate/lexan would that work too?
Ltb0b 20 hours ago
@Ltb0b What is important is flat. If you use a backing board and work on a flat surface, the lexan should be just fine. With glass, the board is mostly there to make handling the glass easier - no glass edges to hit with a tool or on a tool resting on the bench. With lexan, which would not be bothered by that type of tool contact, the backing board would reduce/eliminate flex.
Brentssharpening 15 hours ago