Trailer Wiring Harness Installation - 2007 Chrysler 300C - etrailer.com

http://www.etrailer.com/tv-wiring-install-2007-chrysler-300c.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Today we are going to install part number 28406 from Tow Ready. We are going to install this on a 2007 Chrysler 300C. The first step we have to do is get into a trunk area. Then we need to take off these wing nuts to take out this carpeting and expose the wiring that we need to get to. We need to do that on both sides. There is a little plastic fastener that would help for it to come apart too. There is the wiring we need to get to right there. Now pull back this trunk panel right here, exposing the battery and spare tire. Then we will take the wing nut on the other side and get to the wiring there too. Lastly we are going to take off this interior panel right here. Starting on our driver side, we will go ahead and disconnect here and install our T-connector. Simply push this red button out the way, press on the end, and it comes right apart.

Category:

Autos & Vehicles

Tags:

• 2007
• Chrysler
• 300C
• pole
• wiring
• install
• installation
• etrailer.com
• etrailer