Lenz2 VAWT (First Attempt)
Loading...
Loading...
724
views
Loading...
Uploader Comments (Kntryhart)
see all
All Comments (7)
-
You need to support it on the bottom also. That is why you are having problems with the bearing. It's taking to much stress and twisting pressure. So try two which is better than one. One on top and one on the bottom.
-
Is the skin aluminum? I have a fair amount of galvanized sheet metal, but it's much heavier than aluminum. Tempted to use it, but think I may regret the weight issue. Nice job on that btw.
-
Nice one!
Loading...
0:46
Lenz2 VAWTby antoniskan1977597 views- 0:34
Lenz VAWT IIIby samdekok7212,061 views
- 13:26
Waste Oil Heaterby Kntryhart9,195 views
- 2:01
Lenz2 vawt wind generatorby antoniskan19771,213 views
- 0:58
VAWT WIND TURBINEby antoniskan19771,437 views
- 5:32
Lenz2 wind turbine ,Generator forby underdog005436 views
- 0:21
Lenz2 vawt wind generatorby antoniskan19772,310 views
- 0:44
vawtby davevanden117,236 views
- 0:37
Lenz2 VAWT in actionby pradeeshan3,726 views
- 1:03
MOV02501.3GPby samdekok72556 views
- 3:52
Lenz 2 Counter rotating , 2 turbines. power readings, and video of turbines running.by wiboater4673 views
- 0:42
modified 2 blade lenz turbineby wiboater41,338 views
- 0:46
Intellitek vertical axis wind turbine engineby vklimovs1,215 views
- 0:30
VAWT Lenz Turbineby hristopashov3,734 views
- 1:25
Intellitek vertical axis wind turbine engineby vklimovs6,897 views
- 1:38
vawt Wind turbine home made LT(with neodym magnets)by Plikis0528,774 views
- 0:41
Sturdy Lightweight VAWT and Generatorby vortextower4,243 views
- 0:25
vawt statorby davevanden147,014 views
- 0:23
Cleanfield Energy Vertical Axis Wind Turbines (VAWT)by CleanfieldEnergy2,726 views
- 1:01
Savonius Lenz VAWT Wind Turbineby djpole766,596 views
I like your base. Is it anchored to the ground at all?
Caleb6543 2 years ago
Good day! The base is 5-feet square at the base and is made of welded 3/4-inch black pipe, which forms a pyramid shape.
The base simply sits on the ground with a few weights across the bottom tubes for "insurance". I am pleased on how stable the unit is.
During high winds, it is a little scary watching those large blades whipping around!
A torque shaft travels from the top through the center tube. Someday, the generator will be mounted and driven off the torque shaft.
Thanks!
Kntryhart 2 years ago
great effort.
regrads
sam
emagnets 2 years ago
@emagnets
Thanks. Baby steps at this point. It has been way too cold to work outside on anything! I sure would like to see if can produce any power!
Kntryhart 2 years ago