Aerobatics RC Cessnas Should not do

Some aerobatics that RC cessna's should not do or if you attempt them be careful :) you might snap the wing if you over do these. Check it out.

http://www.metacafe.com/watch/1124279/how_to_tune_nitro_18cxp_engine_for_rc_t...
http://www.metacafe.com/watch/900761/how_to_start_a_nitro_engine_car_or_truck/
http://www.metacafe.com/watch/1159703/fastest_man_in_zhuzhou_china/
http://www.metacafe.com/watch/1323917/how_to_start_and_break_in_a_new_nitro_r...

Category:

Autos & Vehicles

Tags:

• Cessna 182 Skylane
• RC
• RC Planes
• RC Plane
• Planes
• Plane
• Airplane
• Airplanes
• RC Airplanes
• RC Airplane
• Aerobatics
• Simple Aerobatic
• RC Cessna 182 Skylane
• RC Cessna Aerobatics
• Rolls
• Inverted Flight
• Loops
• Flight
• Smooth Landing
• Ali
• Zhuzhou
• RC Cessna
• Beautiful Flight
• Basic Aerobatics
• Broken Landing gear
• Landing gear breaks
• Crash landing

[flyfalcon91]

Hey i just finished making my 182 and i did not get any hardware to attach the wing struts how did you attach yours plzzz help.

[alishanmao]

@flyfalcon91 in main wings there are places with hard wood where you can attach strut using TP Head screws. on the fuselage you can find the similar place too

[flyfalcon91]

@alishanmao Yes i understand what you are saying about the TP head Screws but on the struts that i received they do not get flush with the fuselage. its hard to enplane like the ends of the struts dont flatten out its just a straight piece of wood i wish i could send you a pic of it for better understanding.

[alishanmao]

@flyfalcon91 oh lol I had the same problem but got easy fix. when you fix landing gears sometimes you are provided with a thin flat metal piece with two holes so you can put it on landing gear and put in two screws to tighten the gear rod in its place. use them at the end of each strut (2 for each strut) then you will have something to bend and fix it right. thats what I did.

[alishanmao]

@alishanmao if you are still confused, then get to me via msn and I can show you that piece ;)

[Microice109]

Hey alishianmao can u tell me from where u got the plane plzz :)

[alishanmao]

@Microice109 i live in China and China makes 90% of world RC, so you can guess how i get my planes and where i get them

[molallatrain3751]

that a parkflyre, where the PARK ??????

[SmileXEt]

Nice...but, How about - "places a Rc cessna should not fly" - Power lines and on road with traffic? bad Idea...  still nice plane and aerobatics.

[LiverpoolfcEPL]

I got Cessna Skyartec 182 and how do I install the nose gear plz help its so EASILY fall off! - its a new 5 channel that can steer the nose gear

[christian350zdude]

i bought my first brushed electric cessna 182 4 weeks ago, it flew with no problems . then i stopped flying it for 3 weeks, tried to fly it today but it had some problems with the throttle. when i apply full throttle, all 3 servos (rudder, elevator, and ailerons) move at the same time. anyone got a solution for this?

[Valentino46forever46]

How much is the cessna ? :)

[Valentino46forever46]

How much is this cessna ? :)

[themaster2112]

hi im building a plane from scratch what type of material is best suited to skin the airframe with

[flyfalcon91]

@alishanmao ahhh ok thank you i will give that a shot.