Cheap Homemade quadflyer (how i build it)

Hi guys!...heres a vid of how i made my Quadcopter using the Gaui GU-344 gyro....its not that hard to make one :) really!
have fun watching...hope it helps out..

Jacques

Category:

Science & Technology

Tags:

• Rc
• helicopter
• Gaui
• quadflyer
• quadcopter
• homemade
• brushless
• GU344
• cheap
• 330xs
• rc
• lipo
• sk
• series
• RC Circuit
• Electric
• Mobile Device
• Build Engine
• Power
• gaui
• Electric Power Industry
• Climate
• scratchbuild
• pvc
• Solar

[OneLittleThe]

can u write out what Resources & Material u use? (Sry for my english)

[jacquesone100]

@OneLittleThe 4x motor between 900 to 1100 kv 4x ESC 40amp 1x Gaui GU344 3axis gyro 2x apc 10x3.8SFP 2xAPC 10x3.8SF some PVC stuff and tubes 1x battery 3S , 6 channel radio,reciever for radio and u the man!!! :) check my other quadcopter vids..u will get the hang of it sub and ull stay informed :)

thx for watching!

Jacques

[womackke]

Are your motors the 355 wattt ones? also do you think I could benefit by using a lower kv motor like 900 kv 700 watt with 50amp esc? seems like 1100 is a little fast and might be a little harder to control..Im just trying to get all my info strait before i place the big order. Thanks jacques

[jacquesone100]

@womackke 900 kv/50 amp ESC's sure man that will do..+ 10x3.8 slowflyer props :)

good luck

let me know how it goes!

Jacques

[womackke]

also I saw you said you used 30amp esc, but you are thinking maybe 50 would be better, are the 30s getting hot? would 50esc x 4= 200 amps wouldnt that be a heavy a load for the battery? its probobly not im just wondering...before i order my esc's

[jacquesone100]

@womackke and its 4 x50 yes but that would be full throttle with 12 inch props!! sending ur quad to the moon! hehe 40 to 50 is just to be safe :)

[erickld2002]

@jacquesone100, i would appreciated if you give me all the complete information how to properly build it, if possible? and how much will it cost me in US dollars? thanks

[OneLittleThe]

@jacquesone100

Thx...I wanna try to build a Quadcopter...but i duno where i should start...! :(

[jacquesone100]

@womackke its that..ives seen readings from my watt meter..going over 30 amps sometimes with 10 inch props...its ok if u dont exceed 30 amps to many times but to keep ur esc at a cooler temp i think its better to use 40 to 50 amp speed controllers when using 10inch props...and just use a big enough 3 cell like 3000mah and ull be ok..

hope this helped u out...if not....ask more :)

good luck

Jacques

[womackke]

@jacquesone100 i dont know if you have tried it but would you recomend this over the fy91q? also are you using the, or is there a way to switch from hover to cruise and adjust sensitivity in mid flight from the Tx?