Kam Tri 160 DMX

Kam Tri 160 in loft, Acme HP-3 smoke machine: song- Master Blaster - DJ Luck MC Neat

Couldnt find a decent video on here of the Tri 160 (NOT Fscan) in action, sorry for the poor sound quality, its my camera; enjoy ;) Also, where you see gaps in the beam where there shouldnt be, also the camera, its a bright laser to film!

Category:

Entertainment

Tags:

• Kam
• Tri
• 160
• Fscan
• Master
• Blaster
• laser
• green
• yellow
• red
• DMX
• Lighting
• DJ
• 160mw
• value
• price
• cheap
• quality

[jackhannaford]

Im glad you like the vid- used a smoke machine, not a huge amount, couple of big puffs and let it disperse. Paddyp00h- Yes, i used it against 2 dynamo 250's., check my other vid. The colours on this are very vivid and clear for the price of the laser- i was -so- happy with it if you could combine that colour definition of this one, and the smooth movements of the F-scan, perfect mid-price laser! Sorry for delayed reply guys.

[paddyp00h]

would this be bright enough to cut thew say 8 250w scanners? you see i have been let down by lasers so many time before i need to insure it would be bright enough for my light show.

[jackhannaford]

Yo ive got another video with it against some 250w Dynamo's; its visible but for the money and against 250w, id probably get a 100w green or something,. KAM do a nice green FSCAN for about £150.

[Theorigionaldjsdot]

hi. in response to my last comment. mine is the fscan,,,,but the lasers inside the unit are not lined up right. in ur vid, the yellow is yellow to the end of the beam from what i can see, but on mine the yellow beam fades into green on one side and red on the other. in a 12 ft long room only about 4 or 5 foot of the beam is yellow. a local club i play in sometimes has the same laser as me and the yellow beams seperate on theirs aswel. ur lucky to get one that propperly lined up. anyway. nice vid

[Theorigionaldjsdot]

and yea, i agree with dazzlin1974. ur vid of this laser is much better than kam's own vid of it. the quality and the actual show its self. if id have seen kams vid first i might not have got one. this vid made me get one. i think that kam should thank you,lol. i also think kam should have some sort of quality control in their factory, cos ive seen so many lame tri160's i dont think they have quality controll. ur lucky, u got a good one. peace. paul

[Theorigionaldjsdot]

yea this is the best vid of this laser, i especially like the fact, that, the yellow on urs actually looks yellow, i have the fscan one and the yellow only really looks yellow when i have lots of smoke. also, a local club i play at, has the same kam tri160 fscan as me,,,,but,,,,when it is supposed to make yellow, you can see that the red beam is NEXT to the green, instead of being mixed together. ive seen a few of these that are not as good as they should be. did you have any problems with urs?

[3dbrougham]

Did u use much, if any fog for the effect???

[dazzlin1974]

Thank you Jack. You managed to demo it better than Kam did, and in better quality. Thanks again.