1962 CHEVROLET C10 PRO STREET

CHEVROLET PROSTREET C10. TheTruck's turn key ,very streetable and reliable.It has a PRO BUILT 355 ,4bolt main block,with SCAT Steel Crank,Scat Forged H-Beam Rods.COMP CAM ROLLER CAM,CROWER Roller Lifter's.AIR FLOW RESEARCH 195 Street/Strip 74cc Aluminum Heads,with Stainless Steel valves,7/16 Screw in Studs.COMP CAMS Chromolly Steel 1.6 Roller Rocker Arms,Comp Cams Magnum Push Rods .B&M 162 SUPERCHARGER 10PSI.BOOST. MSD DISTRIBUTOR,MSD 6A BOX,MSD BLASTER COIL. AFE HIGH FLOW air intake system.ALL IN Compression 12.5to1 .Pro Built Turbo 350 Transmission.Custom built Shift Kit, With 2800rpm Stall Torque Converter. DYNOMAX 17/8 ALUMACOAT HEADERS.3 inch Mandrel bent exhaust into 3 inch Super 40 FLOWMASTER mufflers.Narrowed Ford 9 inch Rear End CURRIE ENT. 4.11 Third Member,HAMPTON Rear Axles,CARRERA 3-Way Adjustable Shocks ,and Coil over springs.Motor ,trans and rear end have less than 600 miles since built.Truck has custom interior, Full tilt front end , with louvered hood.Custom built stepped front A -arms ,power sterring .All brand new CHROME.Custom tinted glassand much ,much more.Truck also has fresh custom paint job.White with ice pearl and green pearl ghost flames.This truck's got well over 30k invested in it.Asking $17,000 or best offer "MUST SEE"!!!!!!


--------------------------------------------------------------------------------

Category:

Autos & Vehicles

Tags:

• RACE
• CUSTOM C10

[fourstarman]

Hey man. that seems like a super sweet truck. I would like to know more about the engine. Did you build it? What type of bottom end and cam. Just some secs would be nice. My friend has a 1960 chevy posted on youtube by buzzalmighty, a video of donuts and one of the drag strip. Check them out I think you would like it. It is a 355 scat ultra-lite crank, scat rods, Light pistons .640 solid roller, trick flow heads, dual carb tunnel ram. Runs real nice. I like your truck and wanna see more!

[ssrstown67]

its a 355cid w/ AFR aluminum heads,b&m blower putting out 12.lbs boost ,cupped 8to1 pistons , 4bolt main,its got a nice crank,and rods in it too not sure what brand,narrowed ford 9inch w/4:11's carrea coil over's w/adjustable ladder bars th350 trans w/ 3500 stall

[endlsmr63]

truck sounds great what size is the motor?

[ssrstown67]

its a 355cid w/ AFR aluminum heads,b&m blower putting out 12.lbs boost

[moistmate]

can i like drive it to school? lol  i go a s10 with a 350 but its shity ada gas waster. im looking for somethang now and a c10 is what i want. or do you what what i could get thats fast and dont wast gas. i go to school and back home and i be sitting on e. i get gas like everyday. so halla back lol

[NOSTALGIAPROSTREET]

Go to The 1960 - 1966 Chevrolet & GMC Pickups Message Board forum of The 1947 - Present Chevrolet & GMC Truck Message Board Network. Join and your truck will sell quick. I am 1Bad62Pro/Street. I have a 62 Pro/Street stepside, "Project: Full Metal Yellow Jacket. Check the forum out.

Check out my video for the link.

Thanks,

1Bad62Pro/Street

[63scottyboy]

Sweet truck. i have a 63 short bed. wanting to lower it and yours looks good that low. did you lower with just springs in front and back or? some info would really help me out need cheap and reliable way to lower and how low in front and back. thanks

[mrceebees14]

Sounds like you put a Jet engine into it.

[BlkSun865]

Wow! I bought a 62' C-20 4 weeks ago. So far I've got the 700R4 installed. It still has the 283 in it and 4/11 in the back. But the body is in great shape and it still has the side trim.

Did you have to use shorty spark plugs to keep from welding onto the header pipes? My flowmaster set up practically hugs the block.

[rusho2nd]

i have a 62 ford f-100... the body style is fairly similar to this one

[aea3030]

Love that truck

[mescanf00l325]

you needed water?