rope test 042110(2).wmv
Loading...
Loading...
1,763
Loading...
Uploader Comments (atlantea43660)
see all
All Comments (3)
-
what was the rope and and what was the failure point?
-
cool
Loading...
2:03
Super Slings Inc. 5/8" Shackle Break Testby SuperSlings465 views- 1:56
Soft Shackle biner replacementby opie007410,572 views
- 1:55
Manille textileby CousinYachting14,746 views
- 0:36
5-1/4" SAMSON'S SK-78 AMSTEEL BLUE BREAK TESTby SWOS20111,001 views
- 0:28
Fastest Wire Rope Splicer-- Halo, LLC.by HaloSupply19,086 views
- 2:15
Colligo's Synthetic Riggingby practicalsailor3,172 views
- 1:03
Using a LineGrabber for Directional Pullby ericsan222587 views
- 1:43
Sea-Fit 2" Wide Mouth Tow Shackle Load Test to Theoretical Destruction-- Halo, LLC.by HaloSupply1,520 views
- 0:41
"Tech Cord™" 5/16" or 8mm Prusik Cordby allgear5,063 views
- 4:05
Dyneema Extreme rigging performanceby dyneema2,435 views
- 2:29
COUSIN Trestec_Témoignage de Mr Le Gallby COUSINTRES579 views
- 2:04
Race against the front - Groupama 3by CandAVideo1,813 views
- 1:40
Newport Vesselsby ToreroImports2,889 views
- 2:46
92mm Wire Rope Break Test in HDby HaloSupply6,711 views
- 1:25
12 strand round plait.by nawataipan316,377 views
- 4:04
Rope Test - Making Ofby michimammut7,549 views
- 1:14
Recovery rope snapped dangerousby davidlandy102,172 views
- 4:07
Rope Test 0001by gdk4918,158 views
- 0:14
This is what happens when a synthetic wench line breaks.by mikeg5769,059 views
- 3:01
Dyneema rope VS steel rope - strength test - break testby LanceCampeau26,501 views
It was (as I recall) 5/16" spectra twelve strand and the failure load was very close to the breaking strength of the line.
You can hear individual strands failing starting at about 1:04, long before the big failure.
This is because the load is not evenly balanced within the splice. The failure is the inner braid where it enters the knot.
My explanation:
The knot weakens the line by 50%
The inner and outer braid do not share the load equally.
50% of the load is on each side of the loop.
atlantea43660 8 months ago