Bedan Practice
Loading...
Link to this comment:
Uploader Comments (StuInTokyo)
All Comments (10)
-
@SerSeriana if you sharpen the Bedan carefully and use a diamond hone to put the final edge on the tool, using it regular like the 1st inch of the tool from the sharp point back towards the handle should last you a very, very long time, so what I did was round over the corners of the tool from that point back towards the handle, as I too was having the corners dig into my tool rest.
Cheers!
-
nice shirt, and the end of the video wasn't blindingly bright either.
-
HEY MY LAST NAME IS BEDAN :DDD
-
Hi Stu,loved your video.I just got a bedan,and havn't had alot of turning time lately,but looking forward to practising. I also loiked your other video's aswell on the Bedan. Thanks so much for sharing,now I'll at least have alittle knowledge,,now I'll need to practice,Thanks,Nfld Steve
-
Looks good,probably take forever to get such a nice looking product by hand!
45:41Sarah Outen Presentation at the Pink Cow Wednes...by StuInTokyo201 views
- 0:28Making Mochi For Our New Years Partyby StuInTokyo91 views
- 0:05lamboby StuInTokyo322 views
- 11:482011 March 11 Tohoku Earthquakeby StuInTokyo4,961 views
- 5:27DIY: how to make a whistleby jtypo28,608 views
- 0:56Turning a chess pieceby Byrneskin42,567 views
- 0:21Woodturning a bowl on the VB-36by watch4david41,835 views
- 2:26Sharpening Woodturning Tools using Tormekby bestsharpening87,330 views
- 4:10Hollowing & box making with the Robert Sorby Mu...by robertsorbyengland37,174 views
- 9:54Woodturning - Bellby teksu313174,869 views
- 2:52Slo-mo woodturningby nostalgia7536,449 views
- 8:13Bedan Practice #2by StuInTokyo31,075 views
- 5:16Turn a woman's bracelet with Penn State Industriesby PennStateIndustries78,513 views
- 0:39Trottoleby carelmunoz7,346 views
- 7:31ຕລົກພື້ນບ້ານ ນິທານພື້ນເມືອງ-6by Hoynam133,986,215 views
- 5:22Woodturning - eccentric goblet 2by shovel53144,644 views
- 3:46TORNERIAby tykocesid435,758 views
- 5:39Yasuhiro Satake Japan 2007.wmvby cesking13,501 views
- 4:37Icicle Christmas Ornament - the Headby DarrellSF25,869 views
- 4:48Wood Turned Art Demonstrationby timelesstim33,569 views
One Question, How do you sharpen it? I purchased a 3/8" and 1/2" But I am reluctant to use until I figure out how to or the proper method. Care to share please?
Aharndts 7 months ago
@Aharndts Sharpening it is a bit tricky the first time, you sharpen it face down, on the grinder and go back and forth, being careful to NOT over heat the thin part. Then use a diamond hone to sharpen that face.
NEVER sharpen the back flat side of the bedan, you can touch it up to make sure the corners are square with a diamond stone I use a #400. it should be SHARP, like slice paper sharp!
Cheers!
StuInTokyo 7 months ago
Hey Stu, I'm just wondering, did you have several catches in the begining of your video?
crsereda 3 years ago
At the beginning when the wood stops?
No, I'm using a "Safety Center" type of drive, it has a very small surface to drive the wood, so I had to increase the pressure on the tailstock until the wood was being driven enough to NOT stop like that.
Cheers!
StuInTokyo 3 years ago
It is called a "Bedan"
Cheers!
StuInTokyo 4 years ago