RAP4 T68 Gen7 Review.wmv

A review of the RAP4 T68 gen7.

Category:

Sports

Tags:

• rap4
• rap4 paintball
• rap4 t68
• rap4 t68 gen7
• paintball
• bt
• tippmann
• us army
• project salvo

[JaWayne5]

@azntactical Just sent the pm tell me if you got it. And that's perfect. So your leaving the Gen6 feed adapter on correct instead of gen7 one

[azntactical]

@JaWayne5 i will leave it in hopper form, but will include the gen7 mag feed adapter.

[JaWayne5]

@azntactical Um how do I pm you lol

[azntactical]

@JaWayne5 just go to my channel and you will see a pm by my profile picture. the only problem i had with the gen7 feed adapter is a slight double feed (which is a common thing). with gen6 i had no chops with hopper feed, but with mags, you might if it dont feed right. i do have the detent setting on the gen6 perfect so dont touch the o-ring. i can include 1 18 round mag (black) and the stock 180 round hopper.

[JaWayne5]

@azntactical Also, is it a air through stock? And does it have a shogun remote line with pressure release valve? Sorry for so many questions I just need to be sure on some things

[azntactical]

@JaWayne5 the barrel has screw marks as to where the hand guard was held and the right side of the body has a few blemish from setting it on that side when not in play. the left side almost looks perfect. i can get you some pictures if you want. with the setup that you want to get. just pm my your email.

[JaWayne5]

@azntactical Alright is it easy to install the gen7 mag feed adapter or is there no installation required and can I switch between mag fed and hopper fed

[JaWayne5]

@azntactical Sounds great I'll pm you my email and you can send me some pics of the gun. I would love the pressure release valve as well. If I do buy it is there a mag include or no if there's not I totally understand.

[azntactical]

@JaWayne5 it will comes with an air thru stock and the nipple is currently with the push pin remote coil from rap4. i can easily swap it out for the stock nipple so you can use a pressure release valve (will include for free if needed). the overall condition on the marker is in good condition. i only went out with it once a month (if i was lucky) but mostly once every other month.

[JaWayne5]

@azntactical Sounds like a good deal. I understand it has been used but what is the overall condition? With your experience does it chop paintballs a lot? And if I were to buy it it's fully assembled and no broken parts(besides missing bolt in the back which I can easily replace). And is the finish beat up because I can easily paint it.