Hydrogen at home (Stick Electrolyser part 2)#25
Loading...
Loading...
2,183
Loading...
6:04
HHO Neutral Plates Explainedby hhoconnection38,131 views- 1:58
How To Make Alkaline Water Myselfby AlkalineWater7150,163 views
- 7:36
Green Horizon - Emergency Housing | Container Housing | Green Buildingby greenhorizonmfg8,563 views
- 6:06
Hydrogen Stick 01by fwsclientvideos5,307 views
- 9:46
Hydrogen at home (new cells, container, & bubble testing)#17by markj3024,158 views
- 3:59
Hydrogen Tap (cheep heat) 400by johnaarons2,874 views
- 9:16
AlkaPod Portable Alkaline Water Ionizer - Part 1by SnyderHealth20,667 views
- 8:13
Hi my name is Steve and I'm an HHO-aholicby AlmostHydrogen16,542 views
- 9:34
April update and solution for hho generatorby sm0ky4098,301 views
- 6:36
hydrogenstick2aby fwsclientvideos489 views
- 9:30
Hydrogen at home (testing new sandwich Cell)#27by markj306,527 views
- 5:03
Alkaline Water Ionizers Scam Watchby AlkalineBuzz41,963 views
- 0:50
Don't Buy the Hydrogen Stick [2 of 3]by 636cathleen9,765 views
- 5:20
HHO Dry Cell installation (Part 2)by fireslayer269,194 views
- 2:28
The UPGRADE Testing Phaseby mrjamestferguson1,981 views
- 2:19
Hydrogen Generator for Mileageby HemilGremil1,020 views
- 0:57
Heat your home from water HHO hydroxyby thegreenhomeheater31,741 views
- 3:09
HHO Six Cell Series Electrolyzer - Part 3by ivojara28,213 views
- 6:14
#08-043 Electrolysis Test with Magnesium Sulfateby charlieehler4,839 views
Considering the higher resistance of stainless steel. I'm wondering what would happen if I introduced voltage at both ends as you have. I'm hoping you will do that test for me since it appears that you could easily remove the leads from one end. If the plates had even .1 Ohms of resistance that would consume quite a bit of power as heat at 20 amps. I see this as a way of making a significant improvement in my design and would appreciate your assistance. Bob Campbell
HHO4gas 3 years ago
I did not notice any real difference in MMW with in the connections at the top, bottom, or both. However I did not fully test to see whether I could draw more amps with both the top and bottom connected, having two leads instead of one however should help with overheating problems due to too much draw. If I come across anything interesting in this area I will let you know. The more efficient the unit, the harder it is to get the amps up, but you probably already knew that.
markj30 3 years ago