Easy bolt pull

My rifle has a laylax m170. Due to some questions about how easy it appeared for me to pull the bolt, i've released this video.

The video covers:
1) Technique (thumb vs. torque of bolt)
2) Technique - pull straight back
3) emphasize deliberate smooth and fast action
4) Cocking while prone

Category:

Howto & Style

Tags:

• JG Bar-10
• VSR
• Airsoft sniper
• Bar10
• TM G-spec
• G-spec
• gspec

[TheYomado]

im 12 years old so if i upgrading a bar 10 with an m170 spring would i be able to pull it back?

[nickswimsfast]

@TheYomado I wouldn't recommend it, not only is it hard on your gun, it would be very difficult, for you to pull back. You might be able to run the M150 spring.

[kiusthugs]

That guy looked like he copied those techniques from the computer at most parts when he looks to the side. But probably he was checking the questions

[nickswimsfast]

@kiusthugs I was indeed looking at my computer. It had a rough outline with key points, to make sure i didn't ramble on. There's nothing worse than a long video with no point.

[BoostingPolice]

1:35 he says porn power hahahahahahahhahahahahhahahah~­~~!!!!!!!!!!!!!!!!!hhahahahaha­hhahahahahahahahahahhahhhhahah­ahahhahahahahahahhahahahahhaha­hahhahahhahahyhahahahhyahahhah­ahahhaha

[nickswimsfast]

@BoostingPolice lol nice. Rofl. Just for clarification i was saying "pulling power." But yes it definitely sounds like that.

[ClapMeDown]

I love Vsr's so much, mine has a 170 spring in and i know what you mean with the cocking. ive tried your technique and its helped alot the only thing is my rifle has alot of forward resistence which is even more annoying than the pulling resistence, any tips on how i can cut this down would be great. awsome vid man, thumbs up

[maxrylluc]

nice advice....thanx

[sung715]

Thanks for the helpful tips :)

[Ultim8Soldier]

at minimum you need a zero trigger. anything over 130 will destroy your trigger sears.

[MartiniWinni]

If i get this spring for my BAR 10, do i have to buy all the reinforced parts too? and what Gram bbs do i have to use if i do get the spring and the parts? sorry for all the questions

[nitromehane189]

you have a lot of vsr-10's...

[nitromehane189]

@ClapMeDown the forward resistance is due to the 45 degree sear system you use. the 45 by nature was designed for a light trigger pull, and wasnt a problem in japan due to FPS restrictions. once you move up spring ratings, the sear system will force the piston and spring guide up, causing lots of friction. buy a 90 degree system and you will not have that problem

[chich311]

@gaspedalpump Doesn't hurt that gun with the upgraded parts, and the .36 gram bb which gets fired every day through isn't that much different from not shooting it.