Westin Bull Bar Installation - etrailer.com

http://www.etrailer.com/tv-demo-westin-bull-bar-32-2210.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to install part number 32-2210 from Westin. It is the Bull bar assembly we will be installing on a 2008 Toyota FJ Cruiser. To start our install we will have to install some brackets onto the frame itself and they are tucked up pretty far up in here on the brace that holds the bumper up. There are 2 existing holes so what you need to do is drop 2 bolts into the bumper bracket from the top all the way down through the bottom and it comes with these long bolts to do it with. Now to install one of 2 brackets. There is going to be one here and one is going to have an out rigger from here going out to this bracket to the assembly right here. We do not want to tighten them up yet, we just want to leave them snug so that we have some working room. Next this bracket has to get installed behind it. Then it gets bolted to this assembly here. And then this bracket gets bolted to a threaded hole that is already inside the assembly here.

At this point we can mount up the bull bar to our bracketry and the bar mounts to the inside of the black bracket. Once you have the bull bar mounted up loosely go ahead and go ahead and figure out how close you want the brush guard to the grill and then tighten down the bolts after that. Once you have your 2 bracket bolts here tightened down, then you can go ahead and tighten up the brackets that go to the bumper bracket and the sub assembly here. There you have it for part number 32-2210 from Westin.

Category:

Autos & Vehicles

Tags:

• Toyota
• FJ
• Cruiser
• Bull
• bar
• Bar
• Westin
• 2008
• etrailer.com
• etrailer

[etrailertv]

@mrcurreriyo This bull bar is specifically for 2006-2009 Toyota FJ Cruisers. I looked up your vehicle on etrailer(dot)com and it seems that there is not a custom fit bull bar for your vehicle yet, but if you keep checking back on our site, as soon as there is one available, we will offer it. I wish I could help you more, let me know if you have any other questions.

[mrcurreriyo]

are all trucks/crossovers pre-equepted for this instalation, because i own a 2010 mitsubishi outlander, and i want to put one of these on, and i see this specific bull bar all over, so i guess it's universal?

[etrailertv]

@fazedjoker123 It is possible that your Bull Bar came with extra washers. The best thing to do is go over the instructions and make sure that you completed them exactly as specified. Then, double check all the bolts you put into place to make sure they have the appropriate washers. If all is in place, your installation should be complete!

[fazedjoker123]

i got a 2010 tayota tacoma and i just got one of this i got it on with no problems but on the end of the install i found 4 large gold in color washers not sure where they go

[etrailertv]

@TheModernAge45 at this time we don't have video of a bull bar being installed on a Ram. However, as soon as we get the chance to film one, we will add it online!

[TheModernAge45]

how about a dodge ram any videos for that?