Corolla 3sgte HYZ
Uploader Comments (hyzcoolracing)
All Comments (17)
-
I used the stock MR2 mounts but the mechanic had to weld the new mounts on the body.
-
Beautiful just beautiful.......I wish you had done it to a AE111 Levin or Trueno. My BT 4AGE 20v is really low on power and I really love the 3sgte... I want a 3sgte so bad but have no idea where to start what parts I should be looking for. Any help is appreciated.
-
May i give you a tip: Don't use a piggyback unless you exactly know what you are doing. Spend a little bit more and go for a standalone ecu lik the AEM.
A piggyback is a big risk to use cause it will change your ignition timing.
-
what can you tell me to do this swap very good what i need the you can think and what advise something the we can do bad
-
The first 2 pairs of axles broke because the people who did the swap pretty much did not know what to do.
The best upgrade for the 3sgte is the boost controller, it's probably an additional 10HP per 1psi of boost. Costs range from P2,000 manual to P17K
Then have the electronic wirings done by an expert or who has experience with the 3sgte then get an aftermarket piggy back. The piggy back will bypass the fuel cut system and makes it more safer to rev it at high RPMs and avoid detonations.
Niceeee! Hey i just wanted to know , what transmission are you ussing?
aruba1990 1 year ago
@aruba1990
I used the trans that came with the 3sgte. It has LSD but had to fabricate axles for it.
hyzcoolracing 1 year ago
hwat mounts are you using?
jordanelmvp 1 year ago
@jordanelmvp
I used the mounts that came with the engine but had to do some custom fittings and added more support on top of the engine.
hyzcoolracing 1 year ago
Will the stock transmission work with this engine? o and the guy checking out the motor is going calbo jk
privatepile187 4 years ago
@privatepile187
WHAAAAAAAAAAAAAAAAA the calbo guy is me. bwahahahahahaha
hyzcoolracing 1 year ago