Go Fast Bits Hybrid WRX STi Blow off valve
Uploader Comments (Burton182Boards)
All Comments (42)
-
crap sound........!
-
@stage3LGT you have now proven you know absolutely nothing about tuning a subaru and you know nothing about how blow through works and how to set one up. you didnt even deserve that reponce. learn something before you speak again.
-
@synolimit you're without a doubt an idiot. how in gods name are 1/2 second shifts going to ruin you engine (not motor, motors are for rc cars). its better to run rich for a brief moment than to run lean. save me the time and go jump off of a cliff, do you have any idea how A/F ratios work? ask any tuner in the world if a vta bov will seize your engine. some aftermarket tmic have extended endtanks, longer than that of stock ones. so yes, you can run a blow thru on them.
-
@synolimit BT needs to be installed in a long, straight and much larger housing then the OEM location. OEM being 66mm you need 73mm+. thats not big enough, long enough, and away from bends as you need to be. RULES- at least 18" from the TB, 18" from the BOV, 8"-10" from any bends. this will cut down on turbulance so the MAF doesnt get crazy readings which are impossible to tune around. same goes with a BOV in draw though, you cant tune around it, car runs like shit.
-
@stage3LGT holy crap you have no idea what you talking about! of course you dont have to be set up BT to run a VTA BOV. the video is proof of that. it sure as hell doesnt mean its save and his over rich shifts arent hurting the motor. dumping large amounts of fuel during shifts isnt good. OMG please stop talking, you can run BT with a TMIC? the tmic bolts right to the TB, where in the world are you going to install the MAF with zero room?? you dont even know what BT is do you?!
-
@synolimit you couldn't be more wrong. one, you don't have to be set up for a blow thru maf to run a vta bov. two, a blow thru system can be used in conjunction with a tmic, not just a fmic. three, even if what you said was correct, it wouldn't not have an explosive effect on the engine. youtube comments still never cease to amaze me.
-
unless your blow through which you are not and cant unless you run a FMIC, take this off before you blow your motor up!
-
Fits a 2011 WRX?
-
....
-
@FTFCinema lol dude this BOV does chirp. You need a whole new BOV. Stick with this one you won't get flutter dump like the others.
does this fit an o8
syfe45 2 years ago
yes it does
Burton182Boards 2 years ago