THR 306 TFS Mustang Comp 282 HR Long Tubes Mustang Race Car

Short Vid of another Killer THR Stang rolling out with a new Forged THR 306 and TFS Heads with Comp 282 HR Cam, Holley Systemax Intake, MAC LT Headers, O/R X and 1 chamber Flows.

Category:

Autos & Vehicles

Tags:

• THR
• Texas
• Hot
• Rods
• Mustang
• 306
• TFS
• TrickFlow
• Drag
• Street
• Race
• Shootout
• Fast
• All
• Motor
• NA
• N/A
• 11
• Seconds
• RaceCar

[hickorynut8]

Are you using TFS specific pistons or just larger "inline" valve relief pistons?

I'm interested in TFS heads but I have been told that my cam is borderline with larger inline valve reliefs. Thanks

[THRstang]

@hickorynut8

On the Green Coupe with the TFS set up we custom Fly Cut the Inline valve releifs to fit the TFS offset valves. If you're borderline stick with an Edelbrock, AFR, Canfield, or similar head.

[The08Russ]

what degree did you degree the cam? 5* advance? i ran mine straight up in my motor. check it out please. @ The08Russ

[THRstang]

@The08Russ

Straight up, it's a hi comp 306 limited by the heads more than anything. Hence we didn't want to overrun the RPM. We did redo the Trick Flow's with new springs/locks/retainers to handle the 282 cam. We just didn't port or open them up. Mainly a fun street car to scare the bo-tie's with!

[LightWeightRacing]

What lift does that cam have?

[THRstang]

Its an OTS Comp Cam well suited for Aftermarket Pistons with bigger valve reliefs. It will not clear stock pistons without cutting the pistons. Lift is .565/.574 with a 1.6 rocker. Duration is 282/290 Advertised and Lobe Center is 112 Deg. Its great for 2600-6600 RPM with alot of mods to the 5.0's. You need at least a 3.73 gear or better. We recommend a 4.10 to 4.56 with a 28 inch rear tire on power adder cars or a 26 inch tire on All Motor cars. Hope this helps.

[washingtonpaul549]

CHEVY ASS KICKER!!!!!

[easycheese100]

whose makin popcorn?!?

[anthony1bad351]

there is nothing like a mustang loughing at every thing around it!!!!! that stang sound possessed....

[hickorynut8]

@THRstang Thanks a lot. I may go with AFR's then.

[hickorynut8]

@THRstang

Thanks. btw your stang sounds awesome!

[need2speed94]

Wow this thing sounds bad ass! Lovin the sound of the 302 with this cam

[LightWeightRacing]

Does the firing order change when you put a big cam? My 89 mustang has a .533 lift and it's not running right..you can check it out @ lightweightracing...Any help would be appreciated Thnx...

[dblast27]

hey man where did you get those wheels from with that lugs pattern? I can't them anywhere.