HSV Maloo TK Cam Idle and Rev

A minute or so of idling in the driveway followed by a couple of free revs up to the limiter... the limiter in this is set at 7500rpm in gear and 6800rpm in park or neutral (which is what you'll hear it hit)...

A few rough specs...
5.7L LS1, stock heads, stock inlet manifold, stock bottom end, GMM TK 237/242 Camshaft, 1-5/8" pacemaker Tri-Y headers, cats, and twin 2.5" sureflo system...

Feel free to ask any other questions in the comments section...

Be sure to check out all the other vids in my Channel and feel free to subscribe for future updates and videos.
Thanks :)

Category:

Autos & Vehicles

Tags:

• HSV
• Maloo
• lumpy
• idle
• drag
• racing
• rev
• exhaust
• cats
• high
• flow
• sureflo
• chipmaster
• gmm
• turbo
• killer
• oztrack
• Oztrack
• Tuning
• EFI
• efilive
• mafless
• otr
• grumpy
• mega
• death
• cam
• MS3
• 237/242
• Commodore
• Ute
• Holden
• Australian
• Aussie
• limiter
• loud

[Richie187MW3]

What convertor do you run on this cam? Im looking at getting one. Hows off the line driving in traffic?

[dwaynE2099]

@Richie187MW3 it runs a custom built converter from The Converter Shop in Brisbane....... 8" diameter, 6000rpm stall speed, no lock-up clutch... it's brutal if you don't respect it, but completely driveable and really smooths out the choppy cam... one of my other vids shows me driving the car around softly in urban and city conditions with that stall but the standard camshaft...

[dwaynE2099]

@Richie187MW3 @Richie187MW3 however, I would suggest something around 4000 - 4500rpm from TCE Converters in Melbourne (google them) though and you will want to retain your lock-up function to make highway cruising a little more economical.

[MrRb26det]

sounds angry as hell. what power has it put down?

[dwaynE2099]

@MrRb26det Absolutely no idea?... i haven't had it on a dyno with this camshaft installed... it does run 11.602 on drag radials and has pulled 117mph a few times at full weight... i'd only expect around 250 - 260rwkw with the high stall as it would soak up a bit of power...

[dwaynE2099]

@Richie187MW3 if you use it to tow, i'd look at a smaller cam too... something like the 232/234 GMM Street Racer would be about as big as i'd go if you plan to tow anything, even a jet ski which is a light little boat to pull... you wouldn't want the low down nothing of the TK when trying to get out of a boat ramp!!!

I'd love to see the smoke show with a hute cam/stall combo coming out of the water though, it'd be awesome!!!

[BbAyLiSs1993]

sounds mean !!

[dwaynE2099]

@awesome6litre thank's :)... it is a little savage... neighbours live a fair distance so they haven't got any great reason to complain :)

[DrUnKkAz]

Sounds pretty mean