Briggs Animal test run
Loading...
Loading...
2,382
Loading...
Uploader Comments (torinodad)
see all
All Comments (3)
-
Did you weld that live axle on yourself. Because i dont think that that gokart comes stock with that. Its usually one wheel drive
-
@donaldrox I ran a bracket from head bolt to a clamp around the header. Never breaks
Loading...
1:39
my home made go kart with B&S animalby gokartking45103,457 views- 0:47
Briggs Animalby patman14169,668 views
- 7:48
New Briggs Animal blueprinted by Stout Racing Engines - Methanol Kart Racing Motorby cabracing50,111 views
- 1:11
Pro Mod Worlds Fastest GX200by minidragbike43,341 views
- 1:05
animal on trackby torinodad2,241 views
- 0:56
Briggs & Stratton Animal Go-Kartby jjwade829268,771 views
- 2:42
F200 and Briggs Animal Raceby garrittpwl5,672 views
- 0:24
briggs formula engineby jozay703,959 views
- 2:49
Briggs Animal Limited Kart Racingby o87wevf0b517824056b87,767 views
- 0:30
Daytona Kart Week 2008 Briggs Animal startby usdmsw211,323 views
- 2:15
Another trip with my Briggs powered boatby kiarra0031,582 views
- 1:25
briggs & Stratton Animal Dirt Gokarts.m4vby aussiespeedproducts1,238 views
- 0:59
Marced vs Home Aloneby minidragbike6,568 views
- 5:01
GoPro HD, Karting Briggs Animal, Blackhawk Farms Raceway, Part 1by mattmacwi1,815 views
- 6:15
Bonanza Chopper mini bike Briggs Animalby customizer0071,593 views
- 1:16
Back Yard Go Kartsby torinodad3,783 views
- 5:36
Animal Medium Feature- Ballston Spa Speedway- 4-18-09by gokartking451,648 views
- 2:26
Briggs & Stratton Junior 206 Racing Engineby BriggsStrattonRacing17,109 views
- 1:47
back yard racing with the big blocksby torinodad1,185 views
tell me how long till that egaust breaks i race in wka and i put a whole bunck of brackets and the just keep breaking but i finaly got it but tell me if it breaks
donaldrox 3 years ago
The pipe lasted longer than the motor. Stock motor throwed a rod after 1 month. I did cut about 5 inches out of the middle to make the pipe shorter. Now I have a new animal built from the bottom up,with some serious head work and a 380 blueprinted carb w/matched intake. It is now on a race frame with 13.00x6.5x6 turf tires. I put this pipe on it to start with,but it would not stay. It blowed the pipe off, stripping the threads out of the head. It now has a .990 j pipe with one short brace.
torinodad 3 years ago